Related papers: Epitaxial MgB2 thin films on ZrB2 buffer layers: s…
A large anisotropy in the upper critical field (H$_{C2}$) is observed for MgB$_{2}$ films grown in situ by a pulsed laser deposition process involving growth and annealing of Mg and B multilayers. Measurements of resistivity as a function…
Rare-earth diantimonides display intriguing ground states often associated with structural order, which can be manipulated in thin film geometries. In this study, we report epitaxial synthesis of one such compound, YbSb$_{2}$, on III-V…
Superconducting epitaxial FeSe0.5Te0.5 thin films were prepared on SrTiO3 (001) substrates by pulsed laser deposition. The high purity of the phase, the quality of the growth and the epitaxy were studied with different experimental…
Precursor MgB2 thin films were prepared on sapphire substrates by magnetron sputtering. Influence of ex-situ annealing process on superconducting MgB2 thin films roughness is discussed. Optimized annealing process of MgB precursor thin…
Epitaxial thin films of gallium iron oxide (GaFeO3) are grown on (001) silicon by pulsed laser deposition (PLD) using yttrium-stabilized zirconia (YSZ) buffer layer. The crystalline template buffer layer is in-situ PLD grown through the…
High-grade MgB2(0001) films were grown on Mg(0001) by means of ultra-high-vacuum molecular beam epitaxy. Low energy electron diffraction and x-ray diffraction data indicate that thick films are formed by epitaxially oriented grains with…
We develop the multi-band BCS model of superconductivity in the ultrathin films using the orthogonal tight-binding approximation for constructing the electron wavefunctions. This allows for relatively simple determination of the band…
Considerable excitement has been caused recently by the discovery that the binary boride system with stoichiometry MgB2 is superconducting at the remarkably high temperature of 39 K (1). This potentially opens the way to even higher Tc…
MgB2 thick film was synthesized on the stainless steel substrate by the technique of hybrid physical-chemical vapor deposition (HPCVD), using Mg ingot and B2H6 as the raw materials. The film thickness is about 10 microns. The scanning…
MgGeN2 films were synthesized using metal-organic chemical vapor deposition on GaN/c-sapphire templates and c-plane sapphire substrates. Energy-dispersive X-ray spectroscopy was used to estimate the cation composition ratios. To mitigate…
We report superconductivity in epitaxial PtSb(0001) thin films grown on SrF2(111). Electrical transport measurements reveal a superconducting transition at $T_{\mathrm c}=1.72$ K. The field-induced broadening of the transition and the…
We have grown epitaxial thin films of multiferroic BiMnO$_3$ using pulsed laser deposition. The films were grown on SrTiO$_3$ (001) substrates by ablating a Bi-rich target. Using x-ray diffraction we confirmed that the films were epitaxial…
We report a new in-situ reactive deposition thin film growth technique for the production of MgB2 thin films which offers several advantages over all existing methods and is the first deposition method to enable the production of…
We have successfully deposited thick MgB2 film on the (0001) crystalline surface of sapphire by the method of hybrid physical-chemical vapor deposition (HPCVD). The film thickness is about 1.3 micron. It has a dense and interlaced…
As-grown superconducting MgB_2 thin films have been grown on SrTiO_3(001), MgO(001), and Al_2O_3(0001) substrates by a molecular beam epitaxy (MBE) method with novel co-evaporation conditions of low deposition rate in ultra-high vacuum. The…
Epitaxial MgB2 thick films were grown on Al2O3 substrates at 600 oC by using the hybrid physical chemical vapor deposition (HPCVD) technique. In order to obtain a high magnesium vapor pressure around the substrates, we used a special…
We report on epitaxial growth in thin-film synthesis of a polar magnetic semiconductor AgCrSe2 on lattice-matched yttria-stabilized zirconia (111) substrate by pulsed-layer deposition (PLD). By using Ag-rich PLD target to compensate for Ag…
Ga2O3 thin films were deposited by reactive magnetron sputtering from a liquid gallium target. The influence of deposition temperature, substrate type, and discharge parameters on the structural and electrical properties was systematically…
The in situ annealing conditions of pulsed laser deposited MgB2 films were studied. The precursor films were deposited at 250 C from a stoichiometric MgB2 target in a 120mTorr Ar atmosphere. The films were then in situ annealed at a…
Porous magnesium diboride samples have been prepared by the heat treatment of a pressed mixture of Mg and MgB2 powders. It was found that linked superconducting structure is formed down to the minimum normalized density gamma= d/do= 0.16…