Related papers: Ageing Effect of Sb2Te3 thin films
Organisms in nature can alter the short-range order of an amorphous precursor phase, thereby controlling the resulting crystalline structure. This phenomenon inspired an investigation of the effect of modifying the short-range order within…
BiFeO3 thin films have been grown on Pt/Ti/SiO2/Si substrates with pulsed laser deposition using Au as the top electrode. The resistive switching property of the Au/BiFeO3/Pt stack has been significantly improved by carefully tuning the…
Raman studies of nanocomposite SiCN thin film by sputtering showed that with an increase of substrate temperature from room temperature to 500oC, a transition from mostly sp2 graphitic phase to sp3 carbon took place which was observed from…
We have studied the liquid-like response of the surface of vapour-deposited glassy films of polystyrene to the introduction of gold nanoparticles on the surface. The build-up of polymer material was measured as a function of time and…
Motivated by recent advancements highlighting Ta as a promising material in low-loss superconducting circuits and showing long coherence times in superconducting qubits, we have explored the effect of cryogenic temperatures on the growth of…
The instability, dynamics and morphological transitions of patterns in thin liquid films on periodic striped surfaces (consisting of alternating less and more wettable stripes) are investigated based on 3-D nonlinear simulations that…
The temperature dependent resistivity of two Pr1-xCaxMnO3 (x=0.5 and 0.4) thin films grown on LaAlO3 has been studied as a function of hydrostatic pressure (up to 2.5 GPa) and magnetic field (up to 9T). Both samples show a monotonic…
Glass transition process gets affected in ultrathin films having thickness comparable to the size of the molecules. We observe systematic broadening of glass transition temperature (Tg) as the thickness of the polymer film reduces below the…
Films of Cu-K-In-Se were co-evaporated at varied K/(K+Cu) compositions and substrate temperatures (with constant (K+Cu)/In ~ 0.85). Increased Na composition on the substrate's surface and decreased growth temperature were both found to…
We report on the temperature-dependent optical response of thin films of YBa2Cu3O7-{\delta} (YBCO) in the visible spectral range under cryogenic conditions. Specifically, we observe an increase in transmittance near the superconducting…
The structural, optical and electrical properties of spray deposited antimony (Sb) doped tin oxide (SnO2) thin films, prepared from SnCl4 precursor, have been studied as a function of antimony doping concentration. The doping concentration…
The dielectric properties of NiO thin films grown by pulsed laser deposition have been studied as a function of strain at temperature from 10 to 300 K. Above 150 K, the contribution of space-charge polarization to the dielectric…
High quality Van der Waals chalcogenides are important for phase change data storage, thermoelectrics, and spintronics. Using a combination of statistical design of experiments and density functional theory, we clarify how the…
This paper reports the study of growth kinetics of ion beam sputtered aluminum thin films. Dynamic scaling theory was used to derive the kinetics from AFM measurements. AFM imaging revealed that surface incorporates distinctly different…
Thermal properties - specific heat and heat conductivity coefficient - of polycrystalline BaTiO3 films on massive substrates were studied as a function of the temperature and the film thickness by ac-hot probe method. The anomalies of…
The crystal structures of LaAlO3 films grown by pulsed laser deposition on SrTiO3 substrates at oxygen pressure of 10-3 mbar or 10-5 mbar, where kinetics of ablated species hardly depend on oxygen background pressure, are compared. Our…
Ta (100 nm) / NdFeB (5 $\mu$m) / Ta (100 nm) films have been deposited onto Si substrates using triode sputtering (deposition rate ~ 18 $\mu$m/h). A 2-step procedure was used : deposition at temperatures up to 400 C followed by ex-situ…
Amorphous silicon films prepared by electron beam evaporation have systematically and substantially greater atomic density for higher thickness, higher growth temperature, and slower deposition rate, reaching the density of crystalline Si…
Thin Ba0.5Sr0.5TiO3 (BST) films on p-type Si (100) using The Chemical Solution Deposition (CSD) method. X-ray diffraction (XRD), Scanning electron microscopy (SEM), C-V meter analysis measurement were employed to characterise the films. The…
Temperature dependent structural phase transitions of SrRuO3 thin films epitaxially grown on SrTiO3(001) single crystal substrates have been studied using high-resolution x-ray diffraction. In contrast to bulk SrRuO3, coherently strained…