Related papers: Titanium single electron transistor fabricated by …
We demonstrate shadow evaporation-based fabrication of high-quality ultrasmall normal metal -- insulator -- superconductor tunnel junctions where the thickness of the superconducting electrode is not limited by the requirement of small…
We report the use of plasma-enhanced atomic layer deposition (PEALD) to fabricate single-electron transistors (SETs) featuring ultra-thin (~1 nm) tunnel-transparent SiO2 in Ni-SiO2-Ni tunnel junctions. We show that as a result of the O2…
Deep submicron Al-AlOx-Nb tunnel junctions and single electron transistors with niobium islands were fabricated by electron beam gun shadow evaporation. Using stencil masks consisting of the thermostable polymer polyethersulfone (PES) and…
We demonstrate a technique for creating high quality, large area tunnel junction barriers for normal-insulating- superconducting or superconducting-insulating-superconducting tunnel junctions. We use atomic layer depo- sition and an…
The deposition of a thin oxide layer at metal/semiconductor interfaces has been previously reported as a means of reducing contact resistance in 2D electronics. Using X-ray photoelectron spectroscopy with in-situ Ti deposition, we fabricate…
We report on a new type of single-electron transistor (SET) comprising two highly resistive Cr thin-film strips (~ 1um long) connecting a 1 um-long Al island to two Al outer electrodes. These resistors replace small-area oxide tunnel…
Titanium oxides have many fascinating optical and electrical properties, such as the superconductivity at 2.0 K in cubic titanium monoxide TiO polycrystalline bulk. However, the lack of TiO single crystals or epitaxial films has prevented…
A novel method to fabricate large-area superconducting hybrid tunnel junctions with a suspended central normal metal part is presented. The samples are fabricated by combining photo-lithography and chemical etch of a superconductor -…
We study local oxidation induced by dynamic atomic force microscopy (AFM), commonly called TappingMode AFM. This minimizes the field induced forces, which cause the tip to blunt, and enables us to use very fine tips. We are able to…
We tested oxidized titanium layers as barriers for hybrid Josephson junctions with high $I_cR_n$-products and for the preparation of junctions for tunneling spectroscopy. For that we firstly prepared junctions with conventional…
We demonstrate a tunnel field effect transistor based on a lateral heterostructure patterned from an $\mathrm{LaAlO_3/SrTiO_3}$ electron gas. Charge is injected by tunneling from the $\mathrm{LaAlO_3}$/$\mathrm{SrTiO_3}$ contacts and the…
Conventional electron beam lithography has been used to fabricate mesoscopic Nb wires with a superconducting transition temperature above 7.0 K. The typical line width and the thickness were 200 nm and 45 nm respectively. Nb was deposited…
Recent renewal of the highest transition temperature in a conventional superconductor of the sulfer hydride attracts much attention to exploring simple compounds with the lighter elements, situated in unconventional conditions. We report…
Hybrid superconductor-topological insulator (TI) nanostructures constitute a promising materials platform for exploring proximity-induced superconductivity in systems with topologically protected surface states. A key obstacle has been the…
Metal oxide thin-film transistors are fast becoming a ubiquitous technology for application in driving backplanes of organic light-emitting diode displays. Currently all commercial products rely on metal oxides processed via physical vapor…
Transistors are the fundamental building block of modern electronic devices. So far, all transistors are based on various types of semiconductor junctions. The most common bipolar-junction transistors and metal-oxide-semiconductor…
In order to continue to improve integrated circuit performance and functionality, scaled transistors with short channel lengths and low thickness are needed. But the further scaling of silicon-based devices and the development of…
In this work, we demonstrate high performance indium-tin-oxide (ITO) transistors with the channel thickness down to 1 nm and ferroelectric Hf0.5Zr0.5O2 as gate dielectric. On-current of 0.243 A/mm is achieved on sub-micron gate-length ITO…
We report the development of superconducting tantalum nitride (TaN$_{x} $) normal metal-insulator-superconductor (NIS) tunnel junctions. For the insulating barrier, we used both AlO$_{x}$ and TaO$_{x}$ (Cu-AlO$_{x}$-Al-TaN$_{x} $ and…
Josephson junction transistors and 50-junction arrays with linear junction dimensions from 200 nm down to 70 nm were fabricated from standard Nb/AlOx/Nb trilayers. The fabrication process includes electron beam lithography, dry etching,…