Related papers: Grain boundary defects induced Tc increment in MnS…
TaN thin film is an attractive interlayer as well as a diffusion barrier layer in [FeN/TaN](n) multilayers for the application as potential write-head materials in high-density magnetic recording. We synthesized two series of TaN films on…
Polycrystalline MgB2 samples with 10 wt % silicon powder addition were prepared by an in-situ reaction process. Two different Si powders, one with coarse (44 mm) and the other with nano-size (<100 nm) particles were used for making samples.…
(Mn,Fe)2(P,Si) single crystals have been successfully grown by flux method. Single crystal diffraction demonstrates that Mn0.83Fe1.17P0.72Si0.28 crystallizes in a hexagonal crystal structure (space group P-62m) at both 100 and 280 K, in the…
Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local…
We have investigated the thermodynamic and kinetic barriers involved in the synthesis of MgB2 films. This work refines our initial conjectures predicting optimal MgB2 thin film growth conditions as a consequence of the unusually large…
We report the evolution of crystallographic structure, magnetic ordering and electronic transport in thin films of full-Heusler alloy Co$_2$MnSi deposited on (001) MgO with annealing temperatures ($T_A$). By increasing the $T_A$ from…
Creating materials that do not exist in nature can lead to breakthroughs in science and technology. Magnetic skyrmions are topological excitations that have attracted great attention recently for their potential applications in low power,…
Polycrystalline La$_{2/3}$Sr$_{1/3}$MnO$_{3}$ (LSMO) thin films were synthesized by pulsed laser ablation on single crystal (100) yttria-stabilized zirconia (YSZ) substrates to investigate the mechanism of magneto-transport in a granular…
Manganite thin films are promising candidates for studying the strongly correlated electron systems. Understanding the growth-and morphology-driven changes in the physical properties of manganite thin films is vital for their applications…
Zinc alloys have emerged as promising candidates for biodegradable materials due to their remarkable biocompatibility and favorable mechanical characteristics. The incorporation of alloying elements plays an essential role in advancing the…
Ultrathin ferroelectric films with out-of-plane polarization and high Curie temperatures are key to miniaturizing electronic devices. Most ferroelectrics employed in devices are proper ferroelectrics, where spontaneous polarization is the…
Lithium ferrites are well known materials due to their numerous technological applications especially in microwave devices. Mn-doped lithium ferrite nanoparticles were prepared by sol-gel technique by means of Pechini method, and then…
Si doped ZnO thin films with Si concentrations ranging from 0.4 to 10 % have been grown by sequential pulsed laser deposition on sapphire substrates. The resistivity of the films first decreased from ~ 6.6x10-3 to 4.7x10-4 ohm-cm as the Si…
This work reports on the fabrication of microbump structures on Ni films by single-pulse, localized laser irradiation. Conditions for the reproducible formation of such microstructures have been identified in terms of laser-irradiation and…
Interfacial mixing of elements is a well-known phenomenon found in thin film deposition. For thin-film magnetic heterostructures, interfacial compositional inhomogeneities can have drastic effects on the resulting functionalities. As such,…
We study the effects of growth temperature, Ga:As ratio and post-growth annealing procedure on the Curie temperature, Tc, of (Ga,Mn)As layers grown by molecular beam epitaxy. We achieve the highest Tc values for growth temperatures very…
YMnO3 thin films have been grown on n - type Si substrates by nebulized spray pyrolysis in the Metal - Ferroelectric - Semiconductor (MFS) configuration. The C-V characteristics of the film in MFS structure exhibit hysteretic behavior…
This study presents a comprehensive methodology for determining the thermal conductivity (TC) of materials with high reliability. The methodology addresses issues such as surface topographical variations and substrate interference by…
We report a clear correspondence between changes in the Curie temperature and carrier density upon annealing in epitaxially grown (Ga,Mn)As layers with thicknesses in the range between 5 nm and 20 nm. The changes are dependent on the layer…
The microscopic magnetic properties of high-quality GdN thin films have been investigated by electron spin resonance (ESR) and ferromagnetic resonance (FMR) measurements. Detailed temperature dependence ESR measurements have shown the…