Related papers: Improved operating voltage in InGaN-capped AlGaN-b…
Electrical properties of contact to p-type nitride semiconductor devices, based on gallium nitride were simulated by ab initio and by drift-diffusion calculations. The contact electric properties are shown to be dominated by electron…
We report a numerical analysis of the variation of Aluminium (Al) composition in Al Gallium Nitride (AlGaN)-based Deep-Ultraviolet Light-Emitting Diode (DUV-LED) and its effects on the carrier concentration, radiative recombination, and…
Ultrawide-bandgap AlN is a promising material for next-generation power electronics; however, its practical implementation is hindered by unstable surface chemistry and the high activation energy of p-type dopants. In particular,…
The efficiency of ultra violet LEDs is critically limited by the absorption losses in p-type and metal layers. In this work, surface roughening based light extraction structures are combined with tunneling-based top-contacts to realize…
In this paper we report a novel ohmic contact formation scheme for Extreme Bandgap (EBG) AlxGa1-xN (x>0.6) channel HEMTs with undoped barrier layers. Our approach consists of using a new low temperature (LT) pulsed metal-organic chemical…
This study presents the fabrication and characterizations of an Al$_{0.3}$Ga$_{0.7}$As/Ge$_{0.87}$Sn$_{0.13}$/GeSn p-i-n double heterostructure (DHS) diode following the grafting approach for enhanced optoelectronic applications. By…
InGaN-based visible LEDs find commercial applications for solid-state lighting and displays, but lattice mismatch limits the thickness of InGaN quantum wells that can be grown on GaN with high crystalline quality. Since narrower wells…
Deep ultraviolet (UV) optical emission below 250 nm (~5 eV) in semiconductors is traditionally obtained from high aluminum containing AlGaN alloy quantum wells. It is shown here that high-quality epitaxial ultrathin binary GaN quantum disks…
Light-emitting diodes (LEDs) can bridge the gap between narrow linewidth, expensive lasers and broadband, inefficient thermal globars for low-cost chemical sensing in the mid-infrared (mid-IR). However, the efficiency of III-V based mid-IR…
Localized surface plasmons (LSPs) have played a significant role in improving the light emission efficiency of light emitting diodes (LEDs). In this report, polygonal nanoholes have been fabricated in the p-GaN layer of InGaN-based LEDs by…
InGaN light-emitting diodes (LEDs) are more efficient and cost effective than incandescent and fluorescent lighting, but lattice mismatch limits the thickness of InGaN layers that can be grown on GaN without performance-degrading…
Aluminum Indium Nitride (AlInN) alloys offer great potential for photovoltaic devices thanks to their wide direct bandgap energy that covers the solar spectrum from 0.7 eV (InN) to 6.2 eV (AlN), and their superior resistance to high…
Next-generation high-power radio-frequency (RF) devices increasingly demand transistors that operate efficiently with high gain at high frequencies. High-aluminum-content ultra-wide-bandgap (UWBG) AlGaN alloys have shown great potential for…
We have successfully demonstrated Si/GaAs p-n heterostructures using Al2O3 ultra-thin oxide interfacial layers. The band diagram and band offsets were investigated using X-ray photoelectron spectroscopy and confirm a small discontinuity in…
In this letter, we design and demonstrate an improved MOCVD grown reverse Al-composition graded contact layer to achieve low resistance contact to MOCVD grown ultra-wide bandgap (UWBG) Al0.70Ga0.30N channel metal semiconductor field-effect…
To realize the full spectrum of advantages that the III-nitride materials system offers, the demonstration of p-channel III-nitride based devices is valuable. Authors report the first p-type field effect transistor (pFET) based on an…
We report on the heterostructure and interfacial engineering of metalorganic chemical vapor deposition (MOCVD) grown reverse-graded contacts to ultra-wide bandgap AlGaN. A record low contact resistivity of 1.4 x 10-6 Ohm.cm2 was reported on…
Efficiency droop, i.e., a decline in brightness of LEDs at high electrical currents, has limited the performance of all commercially available LEDs. Until now, it has limited the output power of sub-micron LEDs and lasers to nanowatt range.…
UV-C LEDs pseudomorphically grown by MBE on bulk AlN substrates emitting at 265 nm are demonstrated. High current density up to 800 A/cm$^2$, 5 orders of on/off ratio, and low differential on-resistance of 2.6 m$\Omega\cdot$cm$^2$ at the…
In this study the MOCVD growth and electrical properties of N-polar modulation doped p-AlGaN/GaN superlattices (SLs) were investigated. Hole sheet charge density and mobility were studied as a function of the concentration of the p-type…