Related papers: Improved operating voltage in InGaN-capped AlGaN-b…
Half-Heusler(HH) alloys have shown promising thermoelectric properties in the medium and high temperature range. To harness these material properties for thermoelectric applications, it is important to realize electrical contacts with low…
Periodically poled lithium niobate (PPLN) waveguide is a powerful platform for efficient wavelength conversion. Conventional PPLN converters however typically require long device lengths and high pump powers due to the limited nonlinear…
Attaining low resistivity AlGaN layers is the keystone to improve the efficiency of light emitting devices in the ultraviolet spectral range. Here, we present a microstructural analysis of Ge-doped AlGaN samples with Al mole fraction from…
Mid and deep ultraviolet (UV) laser diodes remain among the least explored devices in semiconductor optoelectronics, despite their importance for spectroscopy, biochemical sensing, disinfection, and emerging quantum photonics. Here, we…
We report on an experimental study of low temperature tunnelling in hybrid NbTiN/GaMnAs structures. The conductance measurements display a root mean square V dependence, consistent with the opening of a correlation gap in the density of…
Blue light-emitting diodes (LEDs) consisting of a buried n+-p+ GaN tunnel junction, (In,Ga)N multiple quantum wells (MQWs) and a n+-GaN top layer are grown on single-crystal Ga-polar n+-GaN bulk wafers by plasma-assisted molecular beam…
In this work, we present a capacitively coupled GaAs p +-i-n/substrate photodetector (CC-GaAs PIN/S PD), which also represents a preliminary step toward 3D detection (x, y, time) of high-energy X-ray pulses. Although the final 3D detector…
High voltage (~2 kV) AlGaN-channel HEMTs were fabricated with 64% Aluminum composition in the channel. The average on-resistance was ~75 ohm. mm (~21 miliohm. cm^2) for LGD = 20 microns. Breakdown voltage reached >3 kV (tool limit) before…
Optical parametric oscillators (OPOs) have been widely used for decades as tunable, narrow linewidth, and coherent light sources for reaching long wavelengths and are attractive for applications such as quantum random number generation and…
An indium arsenide photovoltaic cell with gold front contacts is designed for use in a near-field thermophotovoltaic (NF-TPV) device consisting of millimeter-size surfaces separated by a nanosize vacuum gap. The device operates with a doped…
In a thermophotonic device used in an energy-harvesting configuration, a hot light-emitting diode (LED) is coupled to a photovoltaic (PV) cell by means of electroluminescent radiation in order to produce electrical power. Using…
The AlGaN/GaN quantum-well heterostructures typically exhibit a positive photoconductivity (PPC) during the light illumination. Surprisingly, we found that introducing the GaN/AlN superlattice (SL) back barrier into N-polar AlGaN/GaN…
In the past decade, photonic integrated circuits (PICs) based on thin-film lithium niobate (TFLN) have advanced in various fields, including optical communication, nonlinear photonics, and quantum optics. A critical component is an…
Beta phase gallium oxides, an ultrawide-bandgap semiconductor, has great potential for future power and RF electronics applications but faces challenges in bipolar device applications due to the lack of p-type dopants. In this work, we…
Superconducting tunnel junctions are being developed for application as photon detectors in astronomy. We present the latest results on the development of very high quality, very low critical temperature junctions, fabricated out of pure Al…
AlN-GaN heterostructures are central to high-power and high-frequency electronics, including RF devices, power converters, and AI accelerators. An intermediate Al1-xGaxN (AlGaN) layer is often present, either unintentionally during growth…
The development of compact, energy-efficient integrated lasers operating at 1.3 um remains a critical focus in silicon photonics, essential for advancing data communications and optical interconnect technologies. This paper presents a…
The development of integrated photonic circuits utilizing gallium phosphide requires a robust, scalable process for fabrication of GaP-on-insulator devices. Here we present the first GaP photonic devices on SiO$_2$. The process exploits…
Carbon-doped GaN is a promising material for sub-bandgap triggered optical switches. When incorporated in GaN, carbon introduces deep compensating centers that enable defect-mediated extrinsic photoconductivity. Here, we investigate the…
Tungsten carbide (WC) contacts have been investigated as a novel gold-free Schottky metallization for AlGaN/GaN heterostructures. The evolution of the electrical and structural/compositional properties of the WC/AlGaN contact has been…