Related papers: Digital Low-Level RF system for the Linac Electron…
The SNS linac accelerates an average beam current of 2 mA to an energy of 968 MeV. The linac is pulsed at 60 Hz with an H- beam pulse of 1 ms. The first 185 Mev of the linac uses normal conducting cavities, and the remaining length of the…
By the end of the nineties, the power converter control system (Mugef) of the CERN proton accelerator (SPS) had undergone a complete modernization. This resulted in newly developed hardware for function generation, measurement and I/O in a…
The European XFEL will operate nominally at 17.5 GeV in SP (short pulse) mode with 0.65 ms long bunch train and 10 Hz repetition rate. A possible upgrade of the linac to CW (continuous wave) or LP (long pulse) modes with a corresponding…
LINAC 4 is a normal conducting H- linac proposed at CERN to provide a higher proton flux to the CERN accelerator chain. It should replace the existing LINAC 2 as injector to the Proton Synchrotron Booster and can also operate in the future…
The Fermilab Proton Improvement Plan (PIP) was formed in late 2011 to address important and necessary upgrades to the Proton Source machines (Injector line, Linac and Booster). The goal is to increase the proton flux by doubling the Booster…
Planck is the third generation of mm-wave instruments designed for space observations of the cosmic microwave background (CMB) anisotropies within the new Cosmic Vision 2020 ESA Science Program. Planck will map the whole sky with…
he ESRF control system is in the process of being modernised. The present contrsystem is based on VME, 10 MHz Ethernet, OS9, Solaris, HP-UX, NFS/RPC, Motif and C. The new control system will be based on compact PCI, 100 MHz Ethernet, Linux,…
The hard X-ray instruments at the Linac Coherent Light Source are in the design phase for upgrades that will take full advantage of the high repetition rates that will become available with LCLS-II-HE. The current X-ray Correlation…
The advantages of operating selected transmission lines at frequencies other than the standard 50 or 60 Hz are numerous, encompassing increased power transfer capacity and better utilization of existing infrastructure. While high voltage DC…
An S-band linear accelerator is the source of particles and the front end of the Advanced Photon Source injector. In addition, it supports a low-energy undulator test line (LEUTL) and drives a free-electron laser (FEL). A…
At SLAC, we have designed and installed an X-band radio-frequency transverse deflector system at the LCLS for measurement of the time-resolved lasing effects on the electron beam and extraction of the temporal profile of the pulses in…
The Planck Low Frequency Instrument (LFI) is an array of 22 pseudo-correlation radiometers on-board the Planck satellite to measure temperature and polarization anisotropies in the Cosmic Microwave Background (CMB) in three frequency bands…
The LCLS-II HE superconducting linac can produce multi-energy beams by supporting multiple undulator lines simultaneously. This could be achieved by using the cavity SRF tuner in the off-frequency detune mode. This off-frequency operation…
The project of a10MeV PET cyclotron accelerator for medical diagnosis and treatment was started at Amirkabir University of Technology in 2012. The low-level RF system of cyclotron accelerator is designed to stabilize acceleration voltage…
The Linac Coherent Light Source (LCLS) project at SLAC uses a dense 15 GeV electron beam passing through a long undulator to generate extremely bright x-rays at 1.5 angstroms. The project requires electron bunches with a nominal peak…
We present an array of leaky integrate-and-fire (LIF) neuron circuits designed for the second-generation BrainScaleS mixed-signal 65-nm CMOS neuromorphic hardware. The neuronal array is embedded in the analog network core of a scaled-down…
The LFI (Low Frequency Instrument) on board the ESA Planck satellite is constituted by an array of radiometric detectors actively cooled at 20 K in the 30-70 GHz frequency range in the focal plane of the Planck telescope. In this paper we…
The SPIRAL2 superconducting linear accelerator (LINAC), which has been operational since 2019, employs superconducting, independently phased RF resonators to deliver a wide range of particle beams. Designed for flexibility in particle…
For control of RF cavities installed in Solaris storage ring light source the digital Low Level RF (dLLRF) system was necessary from the beginning of operation. Since there were no expertise at the new constructed facility and no time for…
In this paper, the SHIP4LLRF (Scalable Hardware Integrated Platform for LLRF) based on 6U VPX-standard was designed preliminarily, which includes 6U mother board and two HPC FPGA mezzanine cards (FMCs). The ADC and DAC FMC is based on…