Related papers: Electrical/piezoresistive effects in bent Alpide M…
Bent monolithic active pixel sensors are the basis for the planned fully cylindrical ultra low material budget tracking detector ITS3 of the ALICE experiment. This paper presents results from testbeam campaigns using high-energy particles…
The ALICE Inner Tracking System has been recently upgraded to a full silicon detector consisting entirely of MAPS, arranged in seven concentric layers around the LHC beam pipe. Further ahead, during the LHC Long Shutdown 3, the ALICE…
Monolithic Active Pixel Sensors (MAPS) combine the sensing part and the front-end electronics in the same silicon layer, making use of CMOS technology. Profiting from the progresses of this commercial process, MAPS have been undergoing…
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$\mu$m. To solidify this concept, the…
A new generation of Monolithic Active Pixel Sensors (MAPS), produced in a 65 nm CMOS imaging process, promises higher densities of on-chip circuits and, for a given pixel size, more sophisticated in-pixel logic compared to larger feature…
The ALICE ITS3 is a novel vertex detector replacing the innermost layers of ITS2 during LS3. Composed of three truly cylindrical layers of wafer-sized 65 nm stitched Monolithic Active Pixel Sensors, ITS3 provides high-resolution tracking of…
The ALICE experiment will upgrade the innermost three layers of its vertexing detector, the Inner Tracking System (ITS), during the next LHC Long Shutdown (LS3) with a novel, bent, ultra-light MAPS-based tracker. Six wafer-scale sensor…
Monolithic active pixel sensors (MAPS) produced in a 65 nm CMOS imaging technology are being investigated for applications in particle physics. The MAPS design has a small collection electrode characterized by an input capacitance of ~fF,…
The next generation of MAPS for future tracking detectors will have to meet stringent requirements placed on them. One such detector is the ALICE ITS3 that aims to be very light at 0.07% X/X$_{0}$ per layer and have a low power consumption…
The ALICE ITS3 project foresees the use of ultra-light MAPS, developed in the 65 nm imaging process, for the vertex detector in the ALICE experiment at the LHC to drastically improve the vertexing performance. This new development,…
The ALICE Inner Tracking System upgrade (ITS3) will employ stitched, wafer-scale Monolithic Active Pixel Sensors (MAPS) for the first time in high-energy physics, achieving a material budget of only 0.09$\,$%$\,$X$\mathrm{_{0}}$ per layer.…
For the Inner Tracking System 3 (ITS3) upgrade, the ALICE experiment at CERN requires monolithic active pixel sensors of dimensions up to 97~mm$\,\times\,$266~mm, occupying a large fraction of a 300 mm wafer. To manufacture such a…
During LHC Long Shutdown 3, the ALICE experiment will replace the three innermost layers of its Inner Tracking System (ITS2) with a new vertex detector, the ITS3. This new detector will be assembled using wafer-scale, stitched Monolithic…
The ALICE Collaboration is developing a novel vertexing detector to extend the heavy-flavour physics programme of the experiment during Run 4 by improving the pointing resolution of the tracking, particularly at low transverse momentum. It…
This study investigates the impact of out-of-plane compressive mechanical stress (MS) on the performance and reliability of n-channel IGZO thin film transistors (TFTs). It is demonstrated that MS induces a positive Vth shift in the device…
During the second LHC long shutdown (LS2) the Inner Tracking System (ITS) of ALICE (A Large Ion Collider Experiment) will be replaced by seven layers of CMOS Monolithic Active Pixel Sensors (MAPS). The latest innovations in silicon imaging…
The high integration density of MAPS, with silicon sensor and readout electronics implemented in the same device, allows very thin structures with a greatly reduced material budget. Thicknesses of $\mathcal{O}$(50~$\mu$m), values at which…
The bandgap of MoS2 is highly strain-tunable which results in the modulation of its electrical conductivity and manifests itself as the piezoresistive effect while a piezoelectric effect was also observed in odd-layered MoS2 with broken…
The ALICE detector is undergoing an upgrade for Run 3 at the LHC. A new Inner Tracking System (ITS) is part of this upgrade. The upgraded ALICE ITS features the ALPIDE, a Monolithic Active Pixel Sensor. Due to IC fabrication variations and…
We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a…