Related papers: Microstructure evolution of carbon films with incr…
Raman studies of nanocomposite SiCN thin film by sputtering showed that with an increase of substrate temperature from room temperature to 500oC, a transition from mostly sp2 graphitic phase to sp3 carbon took place which was observed from…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
During the growth of metal thin films on dielectric substrates at a given deposition temperature T, the film's morphology is conditioned by the magnitude and asymmetry of up- and downhill diffusion. Any severe change of this mechanism leads…
Using two different experimental techniques, namely, chemical vapor deposition (CVD) and physical vapor deposition (PVD), we deposited a Lead sulphide (PbS) thin films with a very small lifetime. We investigated the morphology of the…
Physical vapor high-temperature deposition of CdTe thin films is one of the main methods for preparing high-efficiency CdTe solar cells, but high-temperature deposition also has an impact on the internal structure of the film. The…
Hydrogenated amorphous carbon (a-C:H), deposited by the rf-plasma enhanced chemical vapour deposition (rf-PECVD) technique, is a promising material for large area electronic and interlayer dielectric applications. The structural and…
We used microcontact printing to pattern a silicon surface with an iron-containing catalytic solution. Multi-wall carbon nanotubes were subsequently grown on the patterned areas by chemical vapor deposition at temperatures between 650 and…
Different peak trends of tiny grains carbon film have been observed under the investigations of Raman spectroscopy and energy loss spectroscopy. Carbon films known in nanocrystalline and ultra-nanocrystalline diamond films are synthesized…
The fundamental properties of graphene are making it an attractive material for a wide variety of applications. Various techniques have been developed to produce graphene and recently we discovered the synthesis of large area graphene by…
Carbon is one of the most investigated materials and shows chaotic behavior in terms of evolving structure. Synthesizing carbon materials largely depend on the deposition technique, process parameters, condition of substrate surface and…
Al2O3 thin films have been deposited at substrate temperatures between 500{\deg}C to 600{\deg}C by reactive magnetron sputtering using an additional arbitrary substrate bias to tailor the energy distribution of the incident ions. The films…
We study by photoacoustic spectroscopy the band--gap shift effect of CdS films. The CdS films were grown by chemical bath deposition and exposed to different annealing atmospheres over a range of temperature in which the sample structure is…
This work presents a comparison of the structural, chemical and electronic properties of multi-layer graphene grown on SiC(000-1) by using two different growth approaches: thermal decomposition and chemical vapor deposition (CVD). The…
Graphene has attracted a lot of research interests due to its exotic properties and a wide spectrum of potential applications. Chemical vapor deposition (CVD) from gaseous hydrocarbon sources has shown great promises for large-scale…
A hot filament chemical vapor deposition is an attractive technique to deposit carbon films of different applications. In this technique, it is also feasible to study the influence of chamber pressure in the deposition of carbon films. In…
We study the effects of time-dependent substrate/film temperature in the deposition of a mesoscopically thick film using a statistical model that accounts for diffusion of adatoms without lateral neighbors whose coefficients depend on an…
The thermal stability of 200 nm thick plasma enhanced chemical vapor deposited a-C:H and a-C:D layers ranging from soft to hard layers has been studied and compared to that of deposits collected on the Tore Supra tokamak plasma facing…
The temperature-dependent composition and phase formation during physical vapor deposition (PVD) of Mg-Ca thin films is modelled using a CALPHAD-based approach. Considering the Mg and Ca sublimation fluxes calculated based on the vapor…
In this paper we used Raman spectroscopy to investigate the optical properties of vanadium dioxide (VO2) thin films during the thermally induced insulating to metallic phase transition. We observed a significant difference in transition…
Current methods of chemical vapor deposition (CVD) of graphene on copper are complicated by multiple processing steps and by high temperatures required in both preparing the copper and inducing subsequent film growth. Here we demonstrate a…