Related papers: Microstructure evolution of carbon films with incr…
Two-dimensional magnetic materials (2D-MM) are an exciting playground for fundamental research, and for spintronics and quantum sensing. However, their large-grain large-area synthesis using scalable vapour deposition methods is still an…
This work reports the peculiar properties of a graphene film prepared by the chemical vapor deposition (CVD) of ethylene in high vacuum on a well oriented and carefully cleaned Pt(111) crystal surface maintained at high temperature. In-situ…
We present a comparative study of copper film growth with a constant energy neutral beam, thermal evaporation, dc magnetron sputtering, high-power impulse magnetron sputtering (HiP-IMS), and bipolar HiPIMS, through molecular dynamics…
Aluminum oxide thin films were deposited on silicon substrates under different deposition conditions using pulse pressure metal organic chemical vapour deposition (PP-MOCVD). The current study investigates into the growth mechanism of the…
Using ab initio thermodynamics, the stability of a wide range of hydrocarbon adsorbates under various chemical vapor deposition (CVD) conditions (temperature, methane and hydrogen pressures) used in experimental graphene growth protocols at…
In this paper the lubrication-type dynamical model is developed of a molten, pulsed laser-irradiated metallic film. The heat transfer problem that incorporates the absorbed heat from a single beam or interfering beams is solved…
Epitaxial MgB2 thick films were grown on Al2O3 substrates at 600 oC by using the hybrid physical chemical vapor deposition (HPCVD) technique. In order to obtain a high magnesium vapor pressure around the substrates, we used a special…
Pb-free ferroelectric thin films are gaining attention due to their applicability in memory, sensor, actuator, and microelectromechanical system. In this work, Na$_{0.4}$K$_{0.1}$Bi$_{0.5}$TiO$_3$ (NKBT0.1) ferroelectric thin films were…
We revisit here how Raman spectroscopy can be used to estimate the H content in hard hydrogenated amorphous carbon layers. The H content was varied from 2 at.% to 30 at.%, using heat treatments of a a-C:H, from room temperature to 1300 K…
Pulsed laser deposition from a Nd:YAG laser was employed in production of hundreds of nanometer thick quasicrystalline Ti-Zr-Ni films on glass substrate. The influence of deposition temperature Ts on the structure, morphology and…
A comparison between properties of bismuth thin films deposited at substrate temperatures of 296 K (room temperature) and 77 K (quench condensed) is studied across epitaxial, amorphous, and van der Waals substrates. The experiments…
This research investigates the structural, topological, electrical and optical properties of pulsed laser deposited polycrystalline BiFeO3 thin films on silicon and glass substrate at varying deposition temperatures ranging from 400 degC to…
Physical vapor deposition (PVD) is widely used in manufacturing ultra-thin layers of amorphous organic solids. Here, we demonstrate that these films exhibit a sharp transition from glassy solid to liquid-like behavior with thickness below…
We report a Raman scattering investigation of KTa1-xNbxO3 (x = 0.35, 0.5) thin films deposited on MgO and LaAlO3 as a function of temperature. The observed phase sequence in the range from 90 K to 720 K is similar to the structural phase…
Electronic structure of pulsed laser deposited epitaxial LaVO3 (LVO) thin film grown on LaAlO3 (001) (LAO) substrate, has been studied at room temperature and at 130 K, which is below the structural (141 K) and magnetic transition…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
Mercury-Sensitized Photo-Assisted Chemical Vapor Deposition (Hg-Photo-CVD) technique opens new possibilities for reducing thin film growth temperature and producing novel semiconductor materials suitable for the future generation of high…
Stable non-crystalline toluene films of micrometer and nanometer thicknesses were grown by vapor deposition at distinct rates and probed by Fast Scanning Calorimetry. Fast scanning calorimetry is shown to be extremely sensitive to the…
Recently, the films of the Ruddlesden-Popper (RP) nickelate superconductors, in which the (La,Pr)$_3$Ni$_2$O$_7$ system exhibits a remarkable transition temperature $T_c$ exceeding 40 K, were synthesized at ambient pressure. We…
The electron field emission of patterned films of nitrogenated carbon nanotubes is shown to be decisively influenced by the deposition conditions. The growth was carried out by decomposing methane in a nitrogen/ammonia atmosphere using hot…