Related papers: Digital LLRF system for TRIUMF ISIS buncher

The low-level RF system (LLRF) generates the drive sent to the high-power equipment. In synchrotrons, it uses signals from beam pick-ups (radial and longitudinal) to minimize the beam losses and provide a beam with reproducible parameters…

In frame of the development of a high resolution BPM system for the CLIC Main Linac we present the design of a cavity BPM prototype. It consists of a waveguide loaded dipole mode resonator and a monopole mode reference cavity, both…

In this paper, the SHIP4LLRF (Scalable Hardware Integrated Platform for LLRF) based on 6U VPX-standard was designed preliminarily, which includes 6U mother board and two HPC FPGA mezzanine cards (FMCs). The ADC and DAC FMC is based on…

For control of RF cavities installed in Solaris storage ring light source the digital Low Level RF (dLLRF) system was necessary from the beginning of operation. Since there were no expertise at the new constructed facility and no time for…

A key practical constraint on the design of Hybrid automatic repeat request (HARQ) schemes is the size of the on-chip buffer that is available at the receiver to store previously received packets. In fact, in modern wireless standards such…

The signal digitization for CROSS, a bolometric experiment for the search of neutrinoless double beta decay at LSC - Canfranc Underground Laboratory, will be based on a custom solution comprised of an analog-to-digital board interfaced to…

A current-mode CMOS design is proposed for realizing receive mode multi-beams in the analog domain using a novel DFT approximation. High-bandwidth CMOS RF transistors are employed in low-voltage current mirrors to achieve bandwidths…

The CMS experiment has been designed with a two-level trigger system: the Level-1 Trigger, implemented on custom-designed electronics, and the High Level Trigger, a streamlined version of the CMS offline reconstruction software running on a…

We report on the characterization, including residual phase noise and fractional frequency instability, of fiber-coupled PPLN non-linear crystals. These components are devoted to frequency doubling 871 nm light from an extended-cavity diode…

The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…

Pulsed SRF linacs with high accelerating gradients experience large frequency shifts caused by Lorentz force detuning (LFD). A piezoelectric actuator with a resonance control algorithm can maintain the cavity frequency at the nominal level,…

Presently, the manufacturing of active RF devices like klystrons is dominated by expensive and time consuming cycles of machining and brazing. In this article we characterize the RF properties of X-band klystron cavities and an integrated…

A new Digital Pulse Processing (DPP) module has been developed, based on a domino ring sampler version 4 chip (DRS4), with good time resolution for LaBr3 detectors, and different digital timing analysis methods for processing the raw…

An in-trap decay spectroscopy setup has been developed and constructed for use with the TITAN facility at TRIUMF. The goal of this device is to observe weak electron-capture (EC) branching ratios for the odd-odd intermediate nuclei in the…

The low-level RF (LLRF) systems for S-band linear accelerating structures are typically implemented with heterodyne base architectures. We have developed and characterized the next generation LLRF (NG-LLRF) based on the RF system-on-chip…

Time-Division Multiplexing is the readout architecture of choice for many ground and space experiments, as it is a very mature technology with proven outstanding low-frequency noise stability, which represents a central challenge in…

An analog integrated circuit has been designed, in a BiCMOS 0.8 micron technology, for the feasability study of the signal processing of the AMS RICH photomultiplier tubes. This low power, three channel gated integrator includes its own…

China Spallation Neutron Source(CSNS) target power will upgrade to 500 kW(CSNS-II) from 300kW, energy gain of H-Linac will up to 300 MeV from 80 MeV using about 50 superconductor cavities. LLRF is an important device for controlling the…

We propose a new class of information-coupled (IC) Turbo codes to improve the transport block (TB) error rate performance for long-term evolution (LTE) systems, while keeping the hybrid automatic repeat request protocol and the Turbo…

Recently we have reported on a compact microcontroller-based unit developed to accurately synchronise excimer laser pulses (Robert Mingesz et al, Fluct. Noise Lett. 11, 1240007 (2012), DOI: 10.1142/S021947751240007X, arXiv:1109.2632). We…