Related papers: Pressure Sensor Chip with New Electrical Circuit f…
In this paper, a capacitive flexible tactile sensor was designed to measure the pressure of objects based on MEMS technology. This sensor is a structure of a 4x4 array, with metal Ag as the capacitive electrode, which forms the tactile…
Among smart materials, piezoelectric materials occupy a very prominent position for sensing and actuation functions. Combined with simple or more advanced shunts, they are also proposed in various vibration mitigation schemes. However, the…
A highly sensitive refractive index sensor based on grating-assisted strip waveguide directional coupler is proposed. The sensor is designed using two coupled asymmetric strip waveguides with a top-loaded grating structure in one of the…
We present a single-quadrature feedback scheme able to overcome the conventional 3 dB limit on parametric squeezing. The method is experimentally demonstrated in a micromechanical system based on a cantilever with a magnetic tip. The…
Monolithic Active Pixel Sensors (MAPS) have been developed since the late 1990s employing silicon substrate with a thin epitaxial layer in which deposited charge is collected by disordered diffusion rather than by drift in an electric…
Phase sensitive amplifiers (PSAs) have the potential to empower substantial advances in emerging generations of optical communication systems as well as classical and quantum on-chip signal processing. The core building block of a PSA is a…
Nanomechanical resonator-based sensing devices are used in medical diagnostics based on their high-frequency dynamic behavior. Cantilevers fall into the category of Nanomechanical resonators. It also resembles a resonator whose shape is…
We develop Johnson noise thermometry applicable to mesoscopic devices with variable source impedance with high bandwidth for fast data acquisition. By implementing differential noise measurement and two-stage impedance matching, we…
In this paper, a novel coarse-to-fine optical MEMS accelerometer based on the Fabry Perot (FP) interferometer is proposed. The mechanical structure consists of a proof mass that is suspended by four L-shaped springs. The deflection of the…
To increase density of superconductor digital and neuromorphic circuits by 10x and reach integration scale of $10^8$ Josephson junctions (JJs) per chip, we developed a new fabrication process on 200-mm wafers, using self-shunted…
The response of n+p silicon strip sensors to electrons from a Sr-90 source was measured using a multi-channel read-out system with 25 ns sampling time. The measurements were performed over a period of several weeks, during which the…
Gas pressure sensors based on nanomechanical membranes have recently demonstrated an ultra-wide ten-decade measurement range, a gas-type-independent response, and a self-calibrating operation with uncertainties of approximately $1\,\%$. The…
A normal pressure MWPC for beam diagnostics at RIBLL2 has been developed, which has a sensitive area of 80 mm$\times$80 mm and consists of three-layer wire planes. The anode plane is designed with a wider frame to reduce the discharge and…
We have developed a nuclear magnetic resonance spectrometer with a series tuned input circuit for measurements on samples at millikelvin temperatures based on an integrated two-stage superconducting quantum interference device current…
The 12%-S doped FeSe system has a high Tc of 30 K at a pressure of 3.0 GPa. We have successfully investigated its microscopic properties for the first time via $^{77}$Se-NMR measurements under pressure. The antiferromagnetic (AFM)…
Pressure alters the physical, chemical and electronic properties of matter. The development of the diamond anvil cell (DAC) enables tabletop experiments to investigate a diverse landscape of high-pressure phenomena ranging from the…
A photoacoustic (PA) sensor based on higher order acoustic modes is demonstrated. The PA sensor is designed to enhance the gas-detection performance and simultaneously suppress ambient noise sources (e.g. flow noise, electrical noise and…
We have developed a new micro-fabricated platform for the measurement of the specific heat of low heat capacity mg-sized metallic samples, such as superconductors, down to temperatures of as low as $10\,\mathrm{mK}$. It addresses…
In this paper, we report on the observation of nonlinear effects in a nanostrip phononic metasurface (NPM) that enable the tuning of resonance frequencies at 1.42 GHz. The NPM resonator made of periodic nanostrip array is fabricated on a…
Conductive elastomers present desirable qualities for sensing pressure in-vivo, such as high piezoresistance in tiny volumes, conformability and, biocompatibility. Many PDMS-based electrically conductive nanocomposites however, are…