Progress toward superconductor electronics fabrication process with planarized NbN and NbN/Nb layers

To increase density of superconductor digital and neuromorphic circuits by 10x and reach integration scale of $10^8$ Josephson junctions (JJs) per chip, we developed a new fabrication process on 200-mm wafers, using self-shunted Nb/Al-AlOx/Nb JJs and kinetic inductors. The process has a layer of JJs, a layer of resistors, and 10 fully planarized superconducting layers: 8 Nb layers and 2 layers of high kinetic inductance materials, Mo$_2$N and NbN, with sheet inductance of 8 pH/sq and 3 pH/sq, respectively. NbN films were deposited by two methods: with $T_c$=15.5 K by reactive sputtering of a Nb target in Ar+N$_2$ mixture; with $T_c$ in the range from 9 K to 13 K by plasma-enhanced chemical vapor deposition (PECVD) using Tris(diethylamido)(tert-butylimido)niobium(V) metalorganic precursor. PECVD of NbN was investigated to obtain conformal deposition and filling narrow trenches and vias with high depth-to-width ratios, which was not possible to achieve using sputtering and other physical vapor deposition (PVD) methods at temperatures below $200 ^oC$ required to prevent degradation of Nb/Al-AlOx/Nb junctions. Nb layers with 200 nm thickness are used in the process layer stack as ground planes to maintain a high level of interlayer shielding and low intralayer mutual coupling, for passive transmission lines with wave impedances matching impedances of JJs, typically <=50 $\Omega$, and for low-value inductors. NbN and NbN/Nb bilayer are used for cell inductors. Using NbN/Nb bilayers and individual pattering of both layers to form inductors allowed us to minimize parasitic kinetic inductance associated with interlayer vias and connections to JJs as well as to increase critical currents of the vias. Fabrication details and results of electrical characterization of NbN films, wires, and vias, and comparison with Nb properties are given.