Related papers: Optimizing broad ion beam polishing of zircaloy-4 …
Bi4Ti3O12 (BIT) has been considered as material for UV detector since it has optical band gap of about 3.5 eV. Unlike the most used material for this purpose, such as GaN and AlN, BIT is a ferroelectric oxide material. It has shown good…
Circular dichroism spectroscopy is an essential technique for understanding molecular structure and magnetic materials, but spatial resolution is limited by the wavelength of light, and sensitivity sufficient for single-molecule…
A shearing interferometer is presented which uses polarization control to shear the wavefront and to modulate the interference pattern. The shear is generated by spatial walk-off in a birefringent crystal. By adjusting the orientation of…
Impact collision ion scattering spectroscopy (ICISS), which is a variation of low energy ion scattering (LEIS) that employs large scattering angles, is performed on Bi2Se3 surfaces prepared by ion bombardment and annealing (IBA). ICISS…
Electrospray ion beam deposition (ESIBD) is the intact, chemically selective deposition of molecular ions on surfaces in vacuum. Here, we present a general method and dedicated instrumentation for ESIBD-based cryoEM sample preparation of…
X-ray mirrors with high focusing performances are in use in both mirror modules for X-ray telescopes and in synchrotron and FEL (Free Electron Laser) beamlines. A degradation of the focus sharpness arises in general from geometrical…
Metasurfaces have attracted extensive interests due to their ability to locally manipulate optical parameters of light and easy integration to complex optical systems. Particularly, metasurfaces can provide a novel platform for splitting…
Electrochemical strains are a ubiquitous feature of solid state ionic devices ranging from ion batteries and fuel cells to electroresistive and memristive memories. Recently, we proposed a scanning probe microscopy (SPM) based approach,…
We demonstrate that a near-field microwave microscope based on a transmission line resonator allows imaging in a substantially wide range of frequencies, so that the microscope properties approach those of a spatially-resolved impedance…
Deep Ion Beam Lithography (DIBL) has been used for the direct writing of buried graphitic regions in monocrystalline diamond with micrometric resolution. Aiming at the development and the characterization of a fully ion-beam-micromachined…
Since an ion-beam is a viable attractive alternative to other material surface patterning techniques like an electron-beam, a study of the structure, composition and dimension of patterned lines created on surfaces of Si and SrTiO3 wafers…
In this work recently produced and commercially available glazed ceramic object with metallic lustre decoration was studied by using a spectroscopic ellipsometer with rotating compensator. The thickness and metal content of the surface…
Precise knowledge of X-ray diffraction profile shape is crucial in the investigation of the properties of matter in crystals powder. Line-broadening analysis is a pre-processing step in most of the full powder pattern fitting softwares.…
Accurate pattern center determination has long been a challenge for the electron backscatter diffraction (EBSD) community and is becoming critically accuracy-limiting for more recent advanced EBSD techniques. Here, we study the parameter…
This paper presents a new technique of optical beam-induced scattering of mid-IR-laser radiation, which is a special mode of the recently developed scanning mid-IR-laser microscopy. The technique in its present form is designed for…
Convergent beam electron diffraction (CBED) performed on two-dimensional (2D) materials recently emerged as a powerful tool to study structural and stacking defects, adsorbates, atomic 3D displacements in the layers, and the interlayer…
The three scanning electron microscope diffraction based techniques of electron channelling patterns (ECPs), electron channelling contrast imaging (ECCI), and electron back scatter diffraction (EBSD) are reviewed. The dynamical diffraction…
The diffraction peaks of Zircaloy-2 and Zr-2.5%Nb alloys at various deformations are found to be asymmetric in nature. In order to characterize the microstructure from these asymmetric peaks of these deformed alloys, X-Ray Diffraction Line…
Traditional image acquisition for cryo focused ion-beam scanning electron microscopy tomography often sees thousands of images being captured over a period of many hours, with immense data sets being produced. When imaging beam sensitive…
Three ultra-short-period W/B4C multilayers (1.244nm, 1.235nm and 1.034nm) have been fabricated and used for polarization measurement at the 4B7B Beamline of Beijing Synchrotron Radiation Facility (BSRF). By rotating analyzer ellipsometry…