Related papers: Study of simulations of double graded InGaN solar …
The optical properties of V graded InGaN solar cells are studied. Graded InGaN well structures with the indium composition increasing then decreasing in a V shaped pattern have been designed. Through polarization doping, this naturally…
The photovoltaic properties of (0001) n-InGaN/p-GaN single heterojunctions were investigated numerically and compared with those of conventional p-GaN/i-InGaN/n-GaN structures, employing realistic material parameters. This alternative…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
Choosing the Indium Gallium Nitride (InGaN) ternary alloy for thin films solar cells might yield high benefits concerning efficiency and reliability, because its bandgap can be tuned through the Indium composition and radiations have little…
On the road towards next generation high efficiency solar cells, the ternary Indium Gallium Nitride (InGaN) alloy is a good passenger since it allows to cover the whole solar spectrum through the change in its Indium composition. The choice…
The growth of heavily doped tunnel junctions in inverted metamorphic multijunction solar cells induces a strong diffusion of Zn via a point-defects-assisted mechanism. The redistribution of Zn can compensate the n-type doping in the emitter…
In this study, we designed and optimized the performance of pin junction GaAs/AlGaAs heterojunction nanowire solar cell arrays. It is done by performing coupled optoelectronic simulations to find the optimal doping for the GaAs core and…
Following letter introduces a theoretical approach to investigate the effect of two-step GaN barrier layer growth methodology on the performance of InGaN/GaN MQW solar cell, in which a lower temperature GaN cap layer was grown on top of…
The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) is performed for n-type and p-type bases. The case is considered when the Shockley-Read-Hall recombination in the silicon bulk is…
A two-dimensional model was developed to simulate the optoelectronic characteristics of indium-gallium-nitride (InGaN), thin-film, Schottky-barrier solar cells. The solar cells comprise a window, designed to reduce the reflection of…
In this paper, we have investigated the optical properties of GaAs nanocone (NC), inverted nanocone (INC), and hourglass (HG) shaped solar cells by performing Finite Difference Time Domain (FDTD) simulations. The different structures are…
Photovoltaic solar cell is one of the main renewable energy sources, and its power conversion efficiency (PCE) is improved by employing doping or heterojunction to reduce the photogenerated carrier recombination. Here, we propose a…
In this paper, we have designed and investigated the performance of radial GaAs/AlGaAs pin junction nanocone array solar cells by performing coupled optoelectronic simulations to obtain the most optimal design configuration based on its…
Conventional models of planar and bulk heterojunction organic solar cells have been extended by introducing doping in the active layer. We have studied the performance of organic solar cells as a function of dopant concentration. For bulk…
The Indium Gallium Nitride (InGaN) III-Nitride ternary alloy has the potentiality to allow achieving high efficiency solar cells through the tuning of its band gap by changing the Indium composition. It also counts among its advantages a…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
We investigated the current-voltage characteristic of InAs/GaAs quantum dot intermediate band solar cells (QD IBSCs) with different n-type doping density in the QD layer. The n-type doping evidently increases the open circuit voltage,…
This work studies the effect of four different types of buffer layers on the structural and optical properties of InGaN layers grown on Si(111) substrates and their correlation with electrical characteristics. The vertical electrical…
We demonstrate single layer graphene/n-Si Schottky junction solar cells that under AM1.5 illumination exhibit a power conversion efficiency (PCE) of 8.6%. This performance, achieved by doping the graphene with…
Intermediate band solar cells hold the promise of ultrahigh power conversion efficiencies using a single semiconductor junction. Many current implementations use materials with bandgaps too small to achieve maximum efficiency or use…