Related papers: Correlation between X-ray tube current exposure ti…
Due to the merit of establishing volumetric data, X-ray computed tomography (XCT) is increasingly used as a non-destructive evaluation technique in the quality control of advanced manufactured parts with complex non-line-of-sight features.…
Rate-dependent effects in the electronics used to instrument the tagger focal plane at the MAX IV Laboratory have been investigated using the novel approach of Monte Carlo simulation. Results are compared to analytical calculations as well…
A compact low-energy and high-intensity X-ray source for radiation biology applications is presented. A laser-induced plasma moves inside a 30 kV diode and produces a beam of 10$^{14}$ electrons at the anode location. An aluminum foil…
Recently, X-ray imaging dose from computed tomography (CT) or cone beam CT (CBCT) scans has become a serious concern. Patient-specific imaging dose calculation has been proposed for the purpose of dose management. While Monte Carlo (MC)…
Results from the simulations of a Compton gamma camera based on compact configuration of detectors consisting in two detection modules, each of them having two stages of high-resolution position- and energy-sensitive radiation detectors…
The XCAT phantom is a realistic 4D digital torso phantom that is widely used in imaging and therapy research. However, lung mass is not conserved between respiratory phases of the phantom, making detailed dosimetric simulations and dose…
While compressed sensing (CS) based reconstructions have been developed for low-dose CBCT, a clear understanding on the relationship between the image quality and imaging dose at low dose levels is needed. In this paper, we qualitatively…
The imaging performance of X-ray optics (expressed in terms of HEW, Half-Energy-Width) can be severely affected by X-ray scattering caused by the surface roughness of the mirrors. The impact of X-ray scattering has an increasing relevance…
This article presents a theoretical model for the calculation of the current impulse from X-ray induced conductivity in wide-gap semiconductors that contain different types of traps and recombination centres. The absorption of one X-ray…
Diffractive optical elements such as periodic gratings are fundamental devices in X-ray imaging - a technique that medical, material science and security scans rely upon. Fabrication of such structures with high aspect ratios at the…
In this work we present a novel 3D Monte Carlo photon transport program for simulation of multiple refractive scattering based on the refractive properties of X-rays in highly scattering media, like lung tissue. Multiple scattering reduces…
In X-ray tubes, more than 99% of the kilowatts of power supplied to generate X-rays via bremsstrahlung are lost in the form of heat generation in the anode. Therefore, thermal management is a critical barrier to the development of more…
Interplay of the angle dependent X-ray reflectivity and absorption with the photoelectron attenuation length in the photoelectron emission process determine the optimal X-ray incidence angle which maximizes the photoelectron signal.…
Targeted Radionuclide Therapy (TRT) is a well-established technique for cancer treatment. In this approach, radionuclides are bound to specific drugs that selectively transport them to the tumor site. Within the ISOLPHARM project, a…
Laser wakefield acceleration of electrons represents a basis for several types of novel X-ray sources based on Thomson scattering or betatron radiation. The latter provides a high photon flux and a small source size, both being…
To shorten the duration of x-ray pulses, we present a nonlinear optical technique using atoms with core-hole vacancies (core-hole atoms) generated by inner-shell photoionization. The weak Coulomb screening in the core-hole atoms results in…
X-ray imaging is the most popular medical imaging technology. While x-ray radiography is rather cost-effective, tissue structures are superimposed along the x-ray paths. On the other hand, computed tomography (CT) reconstructs internal…
A charge-coupled device (CCD) is a standard imager in optical region in which the image quality is limited by its pixel size. CCDs also function in X-ray region but with substantial differences in performance. An optical photon generates…
The Neupert effect refers to the strong correlation between the soft X-ray (SXR) light curve and the time-integrated hard X-rays (HXR) or microwave flux, which is frequently observed in solar flares. In this article, we therefore utilized…
Semiconductor material based on the rad-optic effect enables ultra-fast detection of X-rays and plays an important role in fusion diagnostics. Obtaining the accurate noise equivalent power (NEP) of the semiconductor ultrafast response…