Related papers: Passivating Surface Defects and Reducing Interface…

Despite the youthfulness of hybrid halide perovskite solar cells, their efficiencies are currently comparable to commercial silicon and have surpassed quantum-dots solar cells. Yet, the scalability of these devices is a challenge due to…

We develop a new approach to calculate the obtainable limit of photoconversion efficiency of tandem solar cells (SCs) and applied it to SCs with both vertical and lateral designs at AM0 and AM1.5 conditions. To get the maximum efficiency,…

The efficiency of solution-processed colloidal quantum dot (QD) based solar cells is limited by poor charge transport in the active layer of the device, which originates from multiple trapping sites provided by QD surface defects. We apply…

Halide perovskite solar cells have demonstrated a rapid increase in power conversion efficiencies. Understanding and mitigating remaining carrier losses in halide perovskites is now crucial to enable further increases to approach their…

In this work, first principle calculations of Cu$_2$ZnSnS$_4$ (CZTS), Cu$_2$ZnGeS$_4$ (CZGS) and Cu$_2$ZnSiS$_4$ (CZSS) are performed to highlight the impact of the cationic substitution on the structural, electronic and optical properties…

Identification of charge carrier separation processes in perovskite/silicon tandem solar cells and recombination at buried interfaces of charge selective contacts is crucial for photovoltaic research. Here, intensity- and wavelength-…

A theoretical approach to photoconversion efficiency modeling in perovskite p-i-n structures is developed. The results of this modeling compare favorably with the experiment and indicate that the surfaces of the perovskite solar cells (SCs)…

The InAs/InGaAs DWELL solar cell grown by MBE is a standard pin diode structure with six layers of InAs QDs embedded in InGaAs quantum wells placed within a 200-nm intrinsic GaAs region. The GaAs control wafer consists of the same pin…

New generation Indium based lead-free Cs2InAgCl6 is a promising halide material in photovoltaic applications due to its good air stability and non-toxic behavior. But its wide band gap (>3 eV) is not suitable for solar spectrum and hence…

$\beta$-Ga$_{2}$O$_{3}$ nanomembranes, obtained by ion-beam-assisted exfoliation, are used in the fabrication of simple metal-semiconductor-metal (MSM) structures, that are tested as photodetectors (PD) and field-effect transistors (FET).…

Metal halide perovskite solar cells have gained widespread attention due to their high efficiency and high defect tolerance. The absorbing perovskite layer is as a mixed electron-ion conductor that supports high rates of ion and charge…

Light-harvesting devices made from PbS quantum dot (QD) absorbers are one of the many promising technologies of third-generation photovoltaics. Their simple, solution-based fabrication together with a highly tunable and broad light…

Deep-level transient spectroscopy and temperature-dependent time-resolved photoluminescence experiments are performed on identical InAs nBn photodetector structures as a function of in-situ and ex-situ 63 MeV proton irradiation to assess…

The theoretical analysis of photovoltaic conversion efficiency of highly effective silicon solar cells (SC) is performed for n-type and p-type bases. The case is considered when the Shockley-Read-Hall recombination in the silicon bulk is…

Organic semiconductors are a promising class of materials for numerous electronic and optoelectronic applications, including solar cells. However, these materials tend to be extremely sensitive to the local environment and surrounding…

In perovskite solar cells, photovoltaic action is created by charge transport layers (CTLs) either side of the light-absorbing metal halide perovskite semiconductor. Hence, the rates for desirable charge extraction and unwanted interfacial…

We report an improved photosensitivity in few-layer tin disulfide (SnS2) field-effect transistors (FETs) following doping with CdSe/ZnS core/shell quantum dots (QDs). The hybrid QD-SnS2 FET devices achieve more than 500 percent increase in…

We have employed state-of-the-art cross-correlation noise spectroscopy to study carrier dynamics in silicon heterojunction solar cells, complimented by SENTARUS simulations of the same devices. These cells were composed of a light absorbing…

A lead-free, completely inorganic, and non-toxic Cs2TiBr6-based double perovskite solar cell (PSC) was simulated via SCAPS 1-D. La-doped BaSnO3 (LBSO) was applied as the electron transport layer (ETL) unprecedentedly in the simulation study…

We demonstrate reduced surface recombination velocity (SRV) and enhanced power-conversion efficiency (PCE) in mixed-cation mixed-halide perovskite solar cells by using (3-aminopropyl)trimethoxysilane (APTMS) as a surface passivator. We show…