Related papers: Processing of nanostructured bulk Fe-Cr alloys by …
The thermal decomposition behavior, the microstructural evolution and its influence on the mechanical properties of a supersaturated Cu Co solid solution with ~100 nm average grain size prepared by severe plastic deformation is investigated…
Carbon nanotubes (CNT) have been recently proposed as stabilizers against grain growth that can happen even at low temperature inputs in nano-crystalline and ultrafine-grained materials obtained by severe plastic deformation. In this study,…
Much scientific and practical interest is currently focused on the atomic-scale mechanical behaviors of metallic nanocrystals with different crystal structures at room temperature, while the high-temperature plastic deformation in tungsten…
The role of TCP phases in deformation of superalloys and steels is still not fully resolved. In particular, the intrinsic deformation mechanisms of these phases are largely unknown including the active slip systems in most of these complex…
High-entropy alloys and ceramics containing at least five principal elements have recently received high attention for various mechanical and functional applications. The application of severe plastic deformation (SPD), particularly the…
Nano-structured molybdenum-copper composites have been produced through severe plastic deformation of liquid-metal infiltrated Cu30Mo70 and Cu50Mo50 (wt.%) starting materials. Processing was carried out using high pressure torsion at room…
Grain boundaries in ultrafine grained (UFG) materials processed by severe plastic deformation (SPD) are often called "non-equilibrium" grain boundaries. Such boundaries are characterized by excess grain boundary energy, presence of long…
Nanocrystalline metals, i.e. metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the…
Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular…
Cobalt-free high-entropy alloys (HEAs) have garnered interest for nuclear structural applications due to their good mechanical performance, thermal stability, and resistance to radiation-induced degradation, while avoiding long-lived Co…
Nanocrystalline metals, i.e. metals with grain sizes from 5 to 50 nm, display technologically interesting properties, such as dramatically increased hardness, increasing with decreasing grain size. Due to the small grain size, direct…
Despite the significant application potential of laser powder bed fusion (L-PBF) processed Ti-6Al-4V components, a detailed understanding of their deformation mechanisms remains limited. This study investigates the deformation behavior of…
The nanostructure and the carbon distribution in a pearlitic steel processed by torsion under high pressure was investigated by three-dimensional atom probe. In the early stage of deformation (shear strain of 62), off-stoichiometry…
Amorphous grain-boundary (GB) complexions in thermally stable nanocrystalline alloys are commonly assumed to be structurally homogeneous, yet their disordered nature makes them susceptible to local short-range ordering (SRO). The influence…
Nanopowder consolidation under high strain rate shock compression is a potential method for synthesizing and processing bulk nanomaterials. A thorough investigation of the shock deformation of powder materials is of great engineering…
Three novel precipitation strengthened bcc alloys which exhibit a smooth microstructural gradient with composition have been fabricated in bulk form by induction casting. All three alloys are comprised of a mixture of disordered A2-(Fe, Cr)…
At the nanometric scale, the synthesis of a random alloy (i.e. without phase segregation, whatever the composition) by chemical synthesis remains a not easy task, even for simple binary type systems. In this context, a unique approach based…
High-entropy alloys (HEAs) have emerged as favorable choices for different applications, including superconductors. The present work examines the impact of nanostructuring via high-pressure torsion (HPT) on the superconducting properties of…
Polycrystalline hcp metals - an important class of engineering materials - typically exhibit complex plasticity because of a limited number of slip systems. Among these metals, deformation is even more complicated in cobalt as it commonly…
Dendritic microstructures are frequently observed in as-solidified refractory high-entropy alloys (RHEAs), and their homogenization typically requires a long-term heat treatment at extremely high temperatures. High-pressure torsion (HPT)…