Severe plastic deformation using high-pressure torsion of ternary Cu-based materials (CuFeCo and CuFeNi) was used to fabricate bulk samples with a nanocrystalline microstructure. The goal was to produce materials featuring the granular giant magnetoresistance effect, requiring interfaces between ferro- and nonmagnetic materials. This magnetic effect was found for both ternary systems; adequate subsequent annealing had a positive influence. The as-deformed states, as well as microstructural changes upon thermal treatments, were studied using scanning electron microscopy and X-ray diffraction measurements. Deducing from electron microscopy, a single-phase structure was observed for all as-deformed samples, indicating the formation of a supersaturated solid solution. However, judging from the presence of the granular giant-magnetoresistive effect, small ferromagnetic particles have to be present. The highest drop in room temperature resistivity (2.45% at 1790 kA/m) was found in Cu62Fe19Ni19 after annealing for 1 h at 400 {\deg}C. Combining the results of classical microstructural studies and magnetic measurements, insights into the evolution of ferromagnetic particles are accessible.
@article{arxiv.2208.11895,
title = {Magnetoresistive behaviour of ternary Cu-based materials processed by high-pressure torsion},
author = {M. Kasalo and S. Wurster and M. Stückler and M. Zawodzki and L. Weissitsch and R. Pippan and A. Bachmaier},
journal= {arXiv preprint arXiv:2208.11895},
year = {2022}
}