Related papers: Improving Performance of Tin-Doped-Zinc-Oxide Thin…
Tandem solar cells offer a promising alternative to exceed the efficiency limits of single-junction silicon photovoltaics, yet they require high-performance recombination junctions that are transparent, passivating, and electrically…
ZnO/GaN alloys exhibit exceptional photocatalyst applications owing to the flexibly tunable band gaps that cover a wide range of the solar spectrum, and thus have attracted extensive attentions over the past few years. In this study,…
Transistors are the fundamental building block of modern electronic devices. So far, all transistors are based on various types of semiconductor junctions. The most common bipolar-junction transistors and metal-oxide-semiconductor…
The transparent and conductive properties of indium tin oxide (ITO) thin films, make them an attractive coating for optically integrated ion traps. However, the relatively low transmittance for wavelengths $<$ 400 nm, high scattering and…
Indium tin oxide (Sn-doped In$_2$O$_{3-\delta}$ or ITO) is an interesting and technologically important transparent conducting oxide. This class of material has been extensively studied for decades, with research efforts focusing on the…
The chemical deposition of high-performance Zinc Oxide (ZnO) thin films is challenging, thus significant efforts have been devoted during the past decades to develop cost-effective, scalable fabrication methods in gas phase. This work…
We report on the fabrication and characterization of superconducting coplanar waveguide (CPW) resonators based on titanium nitride (TiN) thin films deposited on 200\,mm diameter high-resistivity Si(100) substrates. We systematically…
For a detailed study on the semiconductor to metal transition (SMT) in ZnO thin films doped with Al in the concentration range from 0.02 to 2%, we grew these films on (0001) sapphire substrates using sequential pulsed laser deposition. It…
Al-doped ZnO thin films were deposited using reactive high power impulse magnetron sputtering at substrate temperatures between room temperature and 600 $\bullet$ C. Two sample series with different oxygen partial pressures were studied.…
Ta-doped SnO$_2$ films with high conductivity and high optical transparency have been successfully fabricated using rf-sputtering method and their electrical transport properties have been investigated. All films reveal degenerate…
In recent years, considerable efforts have been devoted to developing novel electron-selective materials for crystalline Si (c-Si) solar cells with the attempts to simplify the fabrication process and improve efficiency. In this study,…
Thermoelectric materials, which can convert waste heat to electricity or be utilized as solid-state coolers, hold promise for sustainable energy applications. However, optimizing thermoelectric performance remains a significant challenge…
Acousto-optic (AO) interactions provide a powerful interface between the microwave and optical domains, enabling functionalities such as optical switching, non-reciprocal propagation and efficient microwave-to-optical transduction.…
This paper presents a flexible thin-film underwater transducer based on a mesoporous PVDF membrane embedded with piezoelectrical-actuated microdomes. To enhance piezoelectric performance, ZnO nanoparticles were used as a sacrificial…
High drive current is a critical performance parameter in semiconductor devices for high-speed, low-power logic applications or high-efficiency, high-power, high-speed radio frequency (RF) analog applications. In this work, we demonstrate…
While we demonstrate a back-gated (BG) amorphous Indium-Gallium-Zinc-Oxide (a-IGZO) transistors with a nearly ideal subthreshold slope (SS) ~ 60 mV/dec. However, SS degrades when a top-gated (TG) configuration is implemented. The energy…
The coupling between the electrical transport properties of La2/3Sr1/3MnO3 (LSMO) thin films and structural phase transitions of SrTiO3 (STO) substrates at Ts = 105 K has been investigated. We found that the electrical resistivity of LSMO…
Indium tin oxide (ITO) film, which is the most commonly used transparent conductive film (TCF), has traditionally been believed to be transparent in the visible spectrum but to reflect infrared (IR) light beyond the plasma wavelength…
Ferroelectric materials exhibit interesting electric, mechanical and optical properties. Particularly,tin-film lead zirconium titanate (PZT) has been used as a standard piezo-electric material in micro-electro-mechanical systems.…
A large-area thermoelectric generator (TEG) utilizing a folded thin-film concept is implemented and the performance evaluated for near room temperature applications having modest temperature gradients (< 50 K). The TEGs with the area of…