Related papers: Novel High Efficiency Quadruple Junction Solar Cel…
A high theoretical efficiency of 47.2% was achieved by a novel combination of In0.51Ga0.49P, GaAs, In0.24Ga0.76As and In0.19Ga0.81Sb subcell layers in a simulated quadruple junction solar cell under 1 sun concentration. The electronic…
Multijunction solar cell design is guided by both the theoretical optimal bandgap combination as well as the realistic limitations to materials with these bandgaps. For instance, triple-junction III-V multijunction solar cells commonly use…
Single junction Si solar cells dominate photovoltaics but are close to their efficiency limits. This paper presents ideal limiting efficiencies for tandem and triple junction multijunction solar cells subject only to the constraint of the…
We propose a new triple-junction solar cell structure composed of a III-V heterojunction bipolar transistor solar cell (HBTSC) stacked on top of, and series-connected to, a Si solar cell (III-V-HBTSC-on-Si). The HBTSC is a novel…
Recently, significant progress in the development of III-V/Si dual-junction solar cells has been achieved. This not only boosts the efficiency of Si-based photovoltaic solar cells, but also offers the possibility of highly efficient green…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
Harnessing low energy photons is of paramount importance for multi-junction high efficiency solar cells as well as for thermo-photovoltaic applications. However, semiconductor absorbers with bandgap lower than 0.8 eV have been limited to…
In this paper we carried out theoretical study of the general issues related to the efficiency of SiC:H/a-Si:H single- and multi-junction tandem solar cells. Implementation of numerical simulations by the use of AMPS-1D program of…
We simulated photovoltaic characteristics of single heterojunction solar cell with Cu2ZnSnS4 and Cu2ZnSnSe4 absorber layer numerically using one dimensional solar cell capacitance simulator (SCAPS-1D). n-CdS/ZnO double buffer layer is used…
Cu based ternary chalcogenides are gathering attention for sustainable energy applications due to their reduced complexity compared to quaternary alternatives. We used drift diffusion modeling to evaluate the feasibility of photovoltaics…
Intermediate band solar cells (IBSCs) pursue the increase in efficiency by absorbing below-bandgap energy photons while preserving the output voltage. Experimental IBSCs based on quantum dots have already demonstrated that both…
In order to obtain higher conversion efficiency and to reduce production cost for amorphous silicon/crystalline silicon (a-Si/c-Si) based heterojunction solar cells, a Heterojunction of Amorphous silicon and Crystalline silicon with…
Perovskite (CH3NH3PbI3) solar cells have made significant advances recently. In this paper, we propose a bilayer heterojunction solar cell comprised of a perovskite layer combining with a IV-VI group semiconductor layer, which can give a…
We present a multiscale approach for modeling an intermediate-band solar cell based on a GaAs-GaAlAs quantum dot superlattice of cubic symmetry. Our framework combines high-accuracy theoretical calculations of the superlattice band…
The purpose of this work is to look for a practical structure for application of quantum dots (QD) in solar cells in order to enhance sub-band gap photon absorption. We focuse on a stack of strain-compensated GaSb/GaAs type-II QDs. We…
The fundamental efficiency limit of a single bandgap solar cell is about 31% at one sun with a bandgap of about Eg = 1.35 eV (1), determined by the trade-off of maximising current with a smaller bandgap and voltage with a larger bandgap.…
The photovoltaic properties of (0001) n-InGaN/p-GaN single heterojunctions were investigated numerically and compared with those of conventional p-GaN/i-InGaN/n-GaN structures, employing realistic material parameters. This alternative…
Compound semiconductors have been the predominant building blocks for the current mid-infrared thermophotovoltaic devices relevant to sub-2000 K heat conversion and power beaming. However, the prohibitively high cost associated with these…
Graphene has been intensively studied in photovoltaics focusing on emerging solar cells based on thin films, dye-sensitized, quantum dots, nanowires, etc. However, the typical efficiency of these solar cells incorporating graphene are below…
Photovoltaic materials are recognized for their potential as sustainable energy sources that enable the conversion between light and electrical energy. However, solar cells have been unable to surpass the theoretical limit of 32%, known as…