Related papers: Density and Microstructure of Amorphous Carbon Thi…
We deposit intrinsic hydrogenated amorphous silicon (a-Si:H) thin films by reactive pulsed laser deposition, for various hydrogen pressures in the 0-20 Pa range, at a low deposition temperature of 120C, and investigate the hydrogen…
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to…
The present study provides an investigation on the deposition of carbon-related products on different substrates using a high power dielectric barrier discharge fed with helium and saturated hydrocarbon gases. The discharge has been…
Laser-Arc evaporation of a graphite target has been used to deposit carbon films that exhibit high hardness (45 GPa) and elastic recovery (85%). High Resolution Electron Microscopy (HREM) and Electron Energy Loss Spectroscopy (EELS) were…
Organisms in nature can alter the short-range order of an amorphous precursor phase, thereby controlling the resulting crystalline structure. This phenomenon inspired an investigation of the effect of modifying the short-range order within…
Thin films of the charge-ordered (CO) compound Pr$_{0.5}$Ca$_{0.5}$MnO$_{3}$ have been deposited onto (100)-oriented SrTiO$_{3}$ substrates using the Pulsed Laser Deposition technique. Magnetization and transport properties are measured…
We have studied the effect of nitriding on the humidity sensing properties of hydrogenated amorphous carbon (a-C:H) films. The films were prepared in two stages combining the techniques of physical deposition in vapor phase evaporation…
Nanoporous thin-films are an important class of materials, offering a way to observe fundamental surface and bulk processes with particles larger than individual atoms, but small enough to interact significantly with each other through…
The phototransport properties of plasma deposited highly crystalline undoped hydrogenated microcrystalline silicon films were studied by measuring the steady state photoconductivity (SSPC) as a function of temperature and light intensity.…
In order to get homogeneous nanostructured Aluminum Nitride deposits, thin films were grown at room temperature on [001] Si substrates by radio frequency magnetron reactive sputtering. The deposits were analysed by Transmission Electron…
Co2MnSi (CMS) films of different thicknesses (20, 50 and 100 nm) were grown by radio frequency (RF) sputtering on a-plane sapphire substrates. Our X-rays diffraction study shows that, in all the samples, the cubic <110> CSM axis is normal…
The present study investigates photochromic oxygen-containing yttrium hydride (YHO) thin films deposited by reactive high power impulse magnetron sputtering (HiPIMS) and compares their photochromic, optical, and structural properties with…
Bulk rhenium trioxide (ReO3) has an unusually high electrical conductivity and, being nanosized, has promising catalytic properties. However, the production of pure ReO3 thin films is challenging due to the difficulty to stabilize rhenium…
Thin films of hydrogenated amorphous carbon (a-C:H) deposited by radio frequency plasma-enhanced chemical vapour deposition (rf-PECVD) have been studied for various applications. An interesting property of these films is their high…
In this work, amorphous thin films in Mg-Si-O-N system were prepared in order to investigate the dependence of optical and mechanical properties on Mg composition. Reactive RF magnetron co-sputtering from magnesium and silicon targets were…
The local structure and chemical bonding in two-phase amorphous Cr$_{1-x}$C$_{x}$ nanocomposite thin films are investigated by Cr $K$-edge ($1s$) X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure…
The steady state photoconductivity as a function of temperature and light intensity was measured on plasma deposited highly crystalline undoped hydrogenated microcrystalline silicon films possessing different thicknesses and…
This study presents a comprehensive methodology for determining the thermal conductivity (TC) of materials with high reliability. The methodology addresses issues such as surface topographical variations and substrate interference by…
We systematically investigated the physical properties of amorphous Mo$_{\rm x}$Si$_{1-x}$ films deposited by the magnetron co-sputtering technique. The critical temperature $T_C$ of Mo$_{\rm x}$ Si$_{1-x}$ films increases gradually with…
Spray deposition and inkjet printing of various nanostructures are emerging complementary methods for creating conductive coatings on different substrates. In comparison to established deposition techniques like vacuum metal coating and…