Related papers: Density and Microstructure of Amorphous Carbon Thi…

TiZrV film is mainly applied in the ultra-high vacuum pipe of storage ring. Thin film coatings of palladium which was added onto the TiZrV film to increase the service life of nonevaporable getters and enhance pumping speed for H2, was…

Zinc-iridium oxide (Zn-Ir-O) thin films have been demonstrated as a p-type conducting material. However, the stability of p-type conductivity with respect to chemical composition or temperature is still unclear. In this study we discuss the…

The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…

The thermal stability and separation characteristic of anti-sticking layers of Pt/Cr films were studied in this paper. Several types of adhesion layers were investigated: 10.0 nm Pt, 1.5 nm Cr+50.0 nm Pt, 2.5 nm Cr+50.0 nm Pt and 3.5 nm…

We show that thin dielectric films can be used to enhance the performance of passive atomic mirrors by enabling quantum reflection probabilities of over 90% for atoms incident at velocities ~1 mm/s, achieved in recent experiments. This…

We report the growth of highly c-axis oriented topological insulator (TI) BiSbTe1.5Se1.5 (BSTS) thin films by pulsed laser deposition (PLD) technique. The various growth parameters such as substrate temperature, Argon pressure in the…

We present a comprehensive study of the thickness dependence of static and magneto-dynamic magnetic properties of La$_{0.7}$Sr$_{0.3}$MnO$_3$. Epitaxial pulsed laser deposited La$_{0.7}$Sr$_{0.3}$MnO$_3$ / SrTiO$_3$(001) thin films in the…

Bismuth and Nickel transparent oxides thin films were grown on glass and flexible polythelene terephalate (PET) substrates by DC sputtering technique at room temperature 300 K. The structures of Bi2O3 and NiO films were analyzed by X-ray…

The broadband microstrip ferromagnetic resonance technique has been applied for detection and characterization of a magnetic inhomogeneity in a film sample. In the case of a 100nm thick Permalloy film an additional magnetically depleted top…

The critical current density of a superconducting film can be easily determined by an inductive and contactless method. Driving a sinusoidal current in a single coil placed in front of a superconducting sample, a non zero third harmonic…

The electromagnetic properties of 2D materials are modeled either as single sheets with a surface susceptibility or conductivity, or as thin films of finite thickness with an effective permittivity. Their intrinsic anisotropy, however, has…

Zinc nitride films were synthesized by reactive radio frequency (rf) magnetron sputtering of a zinc target using an Ar+N2 mixture. The as-deposited films were annealed in the air and O2 at 300 {\deg}C for 1 hr. The XRD measurements…

While a linear growth behavior is one of the fingerprints of textbook atomic layer deposition processes, the growth often deviates from that behavior in the initial regime, i.e. the first few cycles of a process. To properly understand the…

Numerical Simulations are employed to create amorphous nano-films of a chosen thickness on a crystalline substrate which induces strain on the film. The films are grown by a vapor deposition technique which was recently developed to create…

The axion is a hypothetical particle which is a candidate for cold dark matter. Haloscope experiments directly search for these particles in strong magnetic fields with RF cavities as detectors. The Relic Axion Detector Exploratory Setup…

5$\mu$m thick SmCo films were deposited onto Si substrates using triode sputtering. A study of the influence of deposition temperature (Tdep <= 600 degrees C) on the structural, magnetic and mechanical properties has shown that optimum…

Stripe domains or any other type domain structures with part of their magnetic moments deviating from the film plane, which usually occur above a certain film thickness, are known problems that limit their potential applications for soft…

The overall quality of multilayer thin films prepared by electrodeposition is strongly influenced by the surface and interface roughness which increases with the layer number. For that very reason the reliable analysis of the first few…

Amorphous carbon nanotubes (a-CNT) with up to four walls and sizes ranging from 200 to 3200 atoms have been simulated, starting from initial random configurations and using the Gaussian Approximation Potential [Phys. Rev. B 95, 094203…

A rapid decrease in the critical current density (Jc) of YBa2Cu3O7-x (YBCO) films with increasing film thickness has been observed for multiple YBCO growth processes. While such behavior is predicted from 2D collective pinning models under…