Related papers: Tool steel ion beam assisted nitrocarburization
The microstructural development in H13 tool steel upon nitriding by an ion beam process was investigated. The nitriding experiments were performed at a relatively low temperature of about 400\deg C and at constant ion beam energy (400 eV)…
Due to the mechanical and inertness properties of the Epsilon phase, its formation as a compact monolayer is most wanted in plasma surface treatments of steels. This phase can be obtained by the inclusion of carbon species in the plasma. In…
In this paper we report the effect of hydrogen on the structural properties of AISI-H13 steel nitrogen-implanted samples in low oxygen partial pressure atmosphere. The samples were implanted in a high vacuum chamber by using a broad ion…
A comprehensive study of pulsed nitriding in AISI H13 tool steel at low temperature (400{\deg}C) is reported for several durations. X-ray diffraction results reveal that a nitrogen enriched compound (Epsilon-Fe2-3N, iron nitride) builds up…
Titanium nitride is a material of interest for many superconducting devices such as nanowire microwave resonators and photon detectors. Thus, controlling the growth of TiN thin films with desirable properties is of high importance. In…
The deposition of boron-doped amorphous carbon thin films on SiO2 substrate was achieved via a focused ion beam-assisted chemical vapor deposition of triphenyl borane (C18H15B) and triphenyl borate (C18H15BO3). The existence of boron in the…
We use room temperature ion beam assisted sputtering (IBAS) to deposit niobium nitride thin films. Electrical and structural characterizations were performed by electric transport and magnetization measurements at variable temperatures,…
This thesis was focused on the surface modification with plasma discharge. Austenitic AISI 316L stainless steel sample was carburised under different experimental conditions and mechanical properties have been studied (thickness, lattice…
Focused ion beam (FIB) techniques are employed widely for nanofabrication, and processing of materials and devices. However, ion irradiation often gives rise to severe damage due to atomic displacements that cause defect formation,…
The modification of steel (AISI 316L and AISI 4140) surface morphology and underlying inter-crystalline grains strain due to Xe$^+$ ion bombardment are reported to affect nitrogen diffusion after a pulsed plasma nitriding process. The ion…
Controlling the spatial incorporation of carbon into hexagonal boron nitride (hBN) is essential for engineering optically active defects, yet existing approaches lack nanoscale precision and control over the carbon supply. Here, we…
Focused ion beam milling allows manipulation of the shape and size of nanostructures to create geometries potentially useful for opto-electronics, thermoelectrics, and quantum computing. We focus on using the ion beam to control the…
We demonstrate a prototype of a Focused Ion Beam machine based on the ionization of a laser-cooled cesium beam adapted for imaging and modifying different surfaces in the few-tens nanometer range. Efficient atomic ionization is obtained by…
Ion beam plays a pivotal role in ion implantations and the fabrication of nanostructures. However, there lacks a quantitative model to describe the residual stresses associated with the ion-beam radiation. Radiation-induced residual…
A modified electron beam induced deposition method using a parallel beam of electrons is developed. The method relies on the build-up of surface potential on an insulating surface exposed to an electron beam. Presence of sharp edges on the…
Present work was aimed to investigate the effect of nitriding time; 1, 1.5, 2.5 & 3.5 h, on surface characteristics & mechanical properties (surface nano-hardness, hardness Vickers, and adhesion) of AISI M2 tool steel. Mechanically…
We report the atomic layer deposition of titanium dioxide on carbon nanosheet templates and investigate the effects of post-deposition annealing in a helium environment using different characterization techniques. The crystallization of the…
Cancer therapy using protons and heavier ions such as carbon has demonstrated advantages over other radiotherapy treatments. To bring about the next generation of clinical facilities, the requirements are likely to reduce the footprint,…
Unexpected ferromagnetism has been observed in carbon doped ZnO films grown by pulsed laser deposition [Phys. Rev. Lett. 99, 127201 (2007)]. In this letter, we introduce carbon into ZnO films by ion implantation. Room temperature…
In this paper, we propose a concept to utilise Carbon-dioxide for Steel-Making and would like to name it after the first author as OSRAM-CO$_2$-SM process. We found in our lab experiments that the carbon content in high-carbon ferro-chrome…