Related papers: Tool steel ion beam assisted nitrocarburization
We demonstrate the imaging of ferromagnetic carbon steel samples and we detect the thinning of their profile with a sensitivity of 0.1 mm using a Cs radio-frequency atomic magnetometer. Images are obtained at room temperature, in…
Ion implantation underpins a vast range of devices and technologies that require precise control over the physical, chemical, electronic, magnetic and optical properties of materials. A variant termed recoil implantation - in which a…
A cluster deposition method was used to produce films of loosely aggregated nanoclusters (NC) of Fe core-Fe3O4 shell or fully oxidized Fe3O4. Films of these NC on Si(100) or MgO(100)/Fe3O4(100) were irradiated to 10^16 Si2+/cm2 near room…
Simple high-performance two-stage hybrid technique was developed for fabrication of different plasmonic nanostructures, including nanorods, nanorings, as well as more complex structures on glass substrates. In this technique a thin noble…
Neutron irradiation induces in steels nanostructural changes, which are at the origin of the mechanical degradation that these materials experience during operation in nuclear power plants. Some of these effects can be studied by using as…
Hexagonal boron nitride (h-BN) is deposited on Si <100> wafer ($\approx$20 cm2) via Plasma Enhanced Chemical Vapor Deposition (PECVD) using a ns-pulsed N2/Ar Micro Hollow Cathode Discharge (MHCD) as a microplasma source. For the first time,…
A beam of free alkali metal nanoparticles is produced by a condensation source, passed through a thermalizing tube adjustable over a broad temperature range, and ionized by tunable light. High stability of the particle flux and an automated…
An ion beam based dry etching method has been developed for progressive reduction of dimensions of prefabricated nanostructures. The method has been successfully applied to aluminum nanowires and aluminum single electron transistors (SET).…
We report the obtaining and primary studies of ~ 250microns thick multi-layer Ti-based protective coating deposited at high cooling rate from substance generated by cathode arc discharge in vacuum. High adhesion to steel substrate was…
Ion implantation is a non-equilibrium doping technique which introduces impurity atoms into a solid regardless of thermodynamic considerations. The formation of metastable alloys above the solubility limit, minimized contribution of lateral…
Abstract The results of intense pulsed ion beam (IPIB) treatment of the soft magnetic amorphous alloy of a FINEMET-type are presented. Foil produced from the alloy was irradiated with short (about 100 ns) pulses of carbon ions and protons…
We demonstrate optical reflectivity and Raman responses of graphite microstructures as a function of light polarization when the incident light is applied perpendicular to the material's stacking direction (c-axis). For this, we employed…
Ion beam analysis techniques are among the most powerful tools for advanced material characterization. Despite their growing relevance in a widening number of fields, most ion beam analysis facilities still rely on the oldest accelerator…
The experimental research on the nature of diffusion by the Mo substrate atoms into the Ti and Cr deposited thin films is completed by the secondary ion-ion emission method. In [1], the initial stage of the Ti thin film on the Mo substrate…
The electrical evaluation of the crystallinity of hexagonal boron nitride (h-BN) is still limited to the measurement of dielectric breakdown strength, in spite of its importance as the substrate for 2-dimensional van der Waals…
Si nanopillars of less than 50 nm diameter have been irradiated in a helium ion microscope with a focused Ne$^+$ beam. The morphological changes due to ion beam irradiation at room temperature and elevated temperatures have been studied…
Low-energy ion beam modification was proposed to create graphene on the top of the insulated diamond-like carbon films. In such low-temperature fabrication process the surface of the amorphous carbon could crystallize to graphene as a…
A metal-oxide film can be used as a hydrogen-isotope permeation barrier in the fuel circulation system for nuclear fusion. We fabricated Er$_2$O$_3$ thin film on a type 316L stainless-steel substrate by using a metal-organic chemical vapor…
Metal - organic nanocomposite thin films represent a versatile class of materials whose properties can be effectively tuned through external stimuli. In this study, Ag+C60 and Au+C60 nanocomposite thin films were briefly investigated to…
Ion beam charge neutralization by electron injection is a complex kinetic process. Recent experiments show that resulting self-potential of the beam after neutralization by plasma could be much lower than the temperature of plasma electrons…