Related papers: Amorphous carbon films in direct current magnetron…
We present results on the deposition and characterization of defected graphene by the chemical vapor deposition (CVD) method. The source of carbon/carbon-containing radicals is thermally decomposed acetone (C2H6CO) in Ar main gas flow. The…
Liquid gas was used to produce DLC films on Cu, Al and steel substrates by DC plasma technique. The absorption in IR reflectance indicates, grown films are DLC. By deconvolution of room temperature UV-visible spectra of the films grown at…
The two-dimensional electron gas (2DEG) at oxides interfaces and surfaces has attracted large attention in physics and research due to its unique electronic properties and possible application in optoelectronics and nanoelectronics. The…
A magnetron sputtering method for the production of thin-film libraries with a spatially varying composition, x, in Bi2Sr2Ca1-xYxCu2Oy (0<=x<=0.5) has been developed. Two targets with a composition of Bi2Sr2YCu2O_{8.5 + \delta} and…
A new kind of three-dimensional carbon allotropes, termed carbon honeycomb (CHC), has recently been synthesized [PRL 116, 055501 (2016)]. Based on the experimental results, a family of graphene networks are constructed, and their electronic…
Transparent conducting oxides (TCOs) are essential for the optoelectronics industry, but there is a critical gap in cost-effective methods to rapidly deposit low sheet resistance, high transmittance films without damaging delicate…
Boron carbide thin films of different thicknesses deposited by ion beam sputtering were studied. The deposited films were characterized by grazing incidence hard x-ray reflectivity (GIXR), resonant soft x-ray reflectivity (RSXR), x-ray…
Antiferromagnetic Mn$_{3}$Ge with a non-collinear Kagome structures present exciting prospects for exploring Berry curvature driven anomalous Hall effects (AHE). Despite substantial progress in bulk systems, the synthesis of crystalline…
Lowering the operating temperature of Solid Oxide Fuel Cells (SOFCs) is essential for improving durability and enabling large scale commercialization. Mixed ionic-electronic conductors (MIECs) of the Ruddlesden-Popper family, such as…
Thin amorphous-CoFeB (a-CFB) is deposited by rf-magnetron sputtering on a self-oxidized Si (100) substrate with different film thicknesses ranging from 0.7 nm to 20 nm. The 5-nm-thick a-CFB film is capped with a W layer for comparison. The…
We demonstrate theoretically that an array of carbon nanoscrolls acts as a hyperbolic magnetic metamaterial in the THz regime with genuine subwavelength operation corresponding to wavelength-to-structure ratio of about 200. Due to the low…
Self-assembled hierarchical solid surfaces are very interesting for wetting phenomena, as observed in a variety of natural and artificial surfaces. Here, we report single-walled (SWCNT) and multi-walled carbon nanotube (MWCNT) thin films…
Nanometer thin single-walled carbon nanotube (CNT) films collected from the aerosol chemical deposition reactors have gathered attention for their promising applications. Densification of these pristine films provides an important way to…
Nanoscale metallic multilayer (NMM) films are systems offering insight into the role of interfaces in metal plasticity, deformation, and strengthening mechanisms. Magnetron sputtering was used to fabricate the Ta-Cu NMM films with a…
A model for the formation of carbon nanotubes (CNTs) and layered graphene in an arc discharge method is developed on the basis of observed erosion of graphite anode under various experimental conditions and analyses of the morphology of the…
Nickel nitride (Ni-N) thin film samples were deposited using reactive magnetron sputtering process utilizing different partial flow of N2 (RN2). They were characterized using x-ray reflectivity (XRR), x-ray diffraction (XRD) and x-ray…
An experimental investigation was conducted to explore spectroscopic and structural characterization of semiconducting yttrium oxide thin film deposited at 623 K (+/- 5K) utilizing reactive pulsed direct current magnetron sputtering. Based…
Altermagnetism presents intriguing possibilities for spintronic devices due to its unique combination of strong spin-splitting and zero net magnetization. However, realizing its full potential hinges on fabricating single-variant…
We report the growth of ultrathin pyrolytic carbon (PyC) films on nickel substrate by using chemical vapor deposition at 1000 {\deg}C under methane ambience. We find that the ultra-fast cooling is crucial for PyC film uniformity by…
Structural, interfacial, optical, and transport properties of large-area MoS2 ultra-thin films on BN-buffered silicon substrates fabricated using magnetron sputtering are investigated. A relatively simple growth strategy is demonstrated…