Related papers: Amorphous carbon films in direct current magnetron…
Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low…
Flexible NbC nanocomposite thin films with carbon content ranging from 0 to 99 at.% were deposited at room temperature on Si (100) and polystyrene substrates by non-reactive magnetron sputtering from pure Nb and C targets without applying…
The present study provides an investigation on the deposition of carbon-related products on different substrates using a high power dielectric barrier discharge fed with helium and saturated hydrocarbon gases. The discharge has been…
A hot filament chemical vapor deposition is an attractive technique to deposit carbon films of different applications. In this technique, it is also feasible to study the influence of chamber pressure in the deposition of carbon films. In…
Copper oxide thin films are deposited on quartz substrates by DC magnetron sputtering and the effect of deposition temperature on their optoelectronic properties is examined in detail. Scanning Electron Microscopy (SEM), X-ray diffraction…
The films with the discrete diamond-like-carbon nanoparticles were prepared by the deposition of the carbon nanoparticle beam. Their morphologies were imaged by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). The…
Cr-doped ZnO films were fabricated by a new but feasible method, that is, annealing Cr-Zn layers deposited via DC magnetron sputtering in air. Microstructures of the films were investigated using X-ray diffraction, scanning electron…
Metal-organic frameworks (MOFs) possessing many unique features have been utilized in several fields in recent years. However, their application in field emission (FE) vacuum electronic device is hindered by their poor electrical…
Sculptured copper thin films were deposited on glass substrates, using different deposition rates. The nano-structure and morphology of the films were obtained, using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning…
This paper reports on the deposition and photoluminescence of amorphous and crystalline thin films of zinc gallium oxide with Ga:Zn atomic ratio varied between 0.3 and 5.7. The films are prepared by reactive direct current magnetron…
Amorphous carbon films have been routinely used to enhance the preparation of frozen-hydrated transmission electron microscopy (TEM) samples, either in retaining protein concentration, providing mechanical stability or dissipating sample…
Tetragonal Mn$_x$Ga$_{1-x}$ (x=0.70, 0.75) thin films grown on SrTiO$_3$ substrates at different temperatures and thicknesses exhibit perpendicular magnetic anisotropy with coercive fields between 1-2 T. Transmission electron microscopy…
We measure the dynamic properties of $\text{Co}_{25}\text{Fe}_{75}$ thin films grown by dc magnetron sputtering. Using ferromagnetic resonance spectroscopy, we demonstrate an ultralow total damping parameter in the out-of-plane…
In this paper, oxidation of Cu during physical sputtering deposition in a high purity and low pressure Ar atmosphere without introducing O2 gas flow was studied systemically. It was found that various flexible Cu-based films could be…
We report an interesting magnetic behavior of a Co film (thickness ~ 350 {\AA}) grown on Si/Ti/Cu buffer layer by electro-deposition (ED) technique. Using depth sensitive X-ray reflectivity and polarized neutron reflectivity (PNR) we…
Epitaxial copper thin films were deposited by magnetron sputtering. The adatoms during deposition are influenced by deposition parameters which cause variations in thin film properties. XRD and FESEM studies were done to get an insight into…
SSMO5347 thin films (thicknesses ~200 nm) were deposited by on-axis dc magnetron sputtering on the single crystal LSAT (001) substrates. These films are oriented along the out of plane c-direction. The ferromagnetic and insulator-metal…
Carbon is one of the most investigated materials and shows chaotic behavior in terms of evolving structure. Synthesizing carbon materials largely depend on the deposition technique, process parameters, condition of substrate surface and…
In this paper we report the deposition of epitaxial thin films of Nd1-xSrxCoO3 with x=0, 0.2 and 0.5 on single crystalline substrates (SrTiO3 and LaAlO3) carried out by means of rf-magnetron sputtering. The deposited films are all…
In this work, we studied cobalt nitride (Co-N) thin films deposited using a dc magnetron sputtering method at a substrate temperature (\Ts) of 523\,K. We find that independent of the reactive gas flow (\pn) used during sputtering, the…