Related papers: High-frequency, scaled MoS2 transistors
Two-dimensional (2D) semiconductors are promising candidates for scaled transistors because they are immune to mobility degradation at the monolayer limit. However, sub-10 nm scaling of 2D semiconductors, such as MoS2, is limited by the…
During the study of resistive switching devices, researchers have found that the influence of the insertion layer cannot be ignored. Many reports have confirmed that the appropriate insertion layer can significantly improve the performance…
Two-dimensional (2D) materials have great potential for use in future electronics due to their atomically thin nature which withstands short channel effects and thus enables better scalability. Device scaling is the process of reducing all…
For the first time, n-type few-layer MoS2 field-effect transistors with graphene/Ti as the hetero-contacts have been fabricated, showing more than 160 mA/mm drain current at 1 {\mu}m gate length with an on-off current ratio of 107. The…
Two-dimensional (2D) materials are a new class of materials with interesting physical properties and ranging from nanoelectronics to sensing and photonics. In addition to graphene, the most studied 2D material, monolayers of other layered…
Two-dimensional MoS2 has emerged as promising material for nanoelectronics and spintronics due to its exotic properties. However, high contact resistance at metal semiconductor MoS2 interface still remains an open issue. Here, we report…
We study field effect transistor characteristics in etched single layer MoS2 nanoribbon devices of width 50nm with ohmic contacts. We employ a SF6 dry plasma process to etch MoS2 nanoribbons using low etching (RF) power allowing very good…
Making ultra-short gate-length transistors significantly contributes to scaling the contacted gate pitch. This, in turn, plays a vital role in achieving smaller standard logic cells for enhanced logic density scaling. As we push the…
Excellent gate electrostatics in field effect transistors (FETs) based on two-dimensional transition metal dichalcogenide (2D TMD) channels can dramatically decrease static power dissipation. Energy efficient FETs operate in enhancement…
The performance and scalability of two-dimensional (2D) field-effect transistors (FETs) are strongly influenced by geometry-defined electrostatics. In most 2D FET studies, the gate overlaps with the source and drain electrodes, allowing the…
The two-dimensional layer of molybdenum disulfide (MoS2) has recently attracted much interest due to its direct-gap property and potential applications in optoelectronics and energy harvesting. However, the synthetic approach to obtain high…
Understanding the interfacial electrical properties between metallic electrodes and low dimensional semiconductors is essential for both fundamental science and practical applications. Here we report the observation of thickness reduction…
Two-dimensional (2D) layered materials-based field-effect transistors (FETs) are promising for ultimate scaled electron device applications because of the improved electrostatics to atomically thin body thickness. However, compared with the…
We report a new approach to integrating high-\k{appa} dielectrics in both bottom- and top-gated MoS2 field-effect transistors (FETs) through thermal oxidation and mechanical assembly of layered twodimensional (2D) TaS2. Combined X-ray…
Two-dimensional materials (2DMs) are a promising alternative to complement and upgrade high-frequency electronics. However, in order to boost their adoption, the availability of numerical tools and physically-based models able to support…
We report the fabrication of back-gated field-effect transistors (FETs) using ultra-thin, mechanically exfoliated MoSe2 flakes. The MoSe2 FETs are n-type and possess a high gate modulation, with On/Off ratios larger than 106. The devices…
Few-layer phosphorene MOSFETs with 0.3-um-long gate and 15-nm-thick Al2O3 gate insulator was found to exhibit a forward-current cutoff frequency of 2 GHz and a maximum oscillation frequency of 8 GHz after de-embedding for the parasitic…
In this article, we study the properties of metal contacts to single-layer molybdenum disulfide (MoS2) crystals, revealing the nature of switching mechanism in MoS2 transistors. On investigating transistor behavior as contact length…
Two-dimensional (2D) layered semiconductors, with their ultimate atomic thickness, have shown promise to scale down transistors for modern integrated circuitry. However, the electrical contacts that connect these materials with external…
Two-dimensional (2D) semiconductors offer a promising prospect for high-performance and energy-efficient devices especially in the sub-10 nm regime. Inspired by the successful fabrication of 2D $\beta$-TeO$_2$ and the high on/off ratio and…