Related papers: Short-Channel Field Effect Transistors with 9-Atom…

We report on the experimental demonstration and electrical characterization of N = 7 armchair graphene nanoribbon (7-AGNR) field effect transistors. The back-gated transistors are fabricated from atomically precise and highly aligned…

We report the realization of top-gated graphene nanoribbon field effect transistors (GNRFETs) of ~10 nm width on large-area epitaxial graphene exhibiting the opening of a band gap of ~0.14 eV. Contrary to prior observations of disordered…

Recently developed processes have enabled bottom-up chemical synthesis of graphene nanoribbons (GNRs) with precise atomic structure. These GNRs are ideal candidates for electronic devices because of their uniformity, extremely narrow width…

Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as…

The performance limits of the multilayer graphene nanoribbon (GNR) field-effect transistor (FET) are assessed and compared to those of monolayer GNR FET and carbon nanotube (CNT) FET. The results show that with a thin high-k gate insulator…

The scaling behaviors of graphene nanoribbon (GNR) Schottky barrier field-effect transistors (SBFETs) are studied by solving the non-equilibrium Green's function (NEGF) transport equation in an atomistic basis set self-consistently with a…

Graphene nanoribbon (GNR) emerges as an exceptionally promising channel candidate due to its tunable sizable bandgap (0-3 eV), ultrahigh carrier mobility (up to 4600 cm^(2) V^(-1) s^(-1)), and excellent device performance (current on-off…

Tunneling field-effect transistors (FETs) have been intensely explored recently due to its potential to address power concerns in nanoelectronics. The recently discovered graphene nanoribbon (GNR) is ideal for tunneling FETs due to its…

High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to…

We propose an analytical device model for a graphene nanoribbon field-effect transistor (GNR-FET). The GNR-FET under consideration is based on a heterostructure which consists of an array of nanoribbons clad between the highly conducting…

Bottom-up assembled nanomaterials and nanostructures allow for the studies of rich and unprecedented quantum-related and mesoscopic transport phenomena. However, it can be difficult to quantify the correlations between the geometrical or…

Short channel (~80 nm) n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) with potassium (K) doped source and drain regions and high-k gate dielectrics (ALD HfO2) are obtained. For nanotubes with diameter ~ 1.6 nm…

In graphene nanoribbons (GNRs), the lateral confinement of charge carriers opens a band gap, the key feature to enable novel graphene-based electronics. Successful synthesis of GNRs has triggered efforts to realize field-effect transistors…

A low complexity computational model of the current-voltage characteristics for graphene nano-ribbon (GNR) field effect transistors (FET), able to simulate a hundred of points in few seconds using a PC, is presented. For quantum capacitance…

Recently, an extremely-air-stable one-dimensional 7-9-7-AGNR was successfully fabricated. To further reveal its potential application in sub-5-nm field-effect transistors (FETs), there is an urgent need to develop integrated circuits. Here,…

Creating a good contact between electrodes and graphene nanoribbons (GNRs) has been a longstanding challenge in searching for the next GNR-based nanoelectronics. This quest requires the controlled fabrication of sub-20 nm metallic gaps, a…

We report a bipolar field effect tunneling transistor that exploits to advantage the low density of states in graphene and its one atomic layer thickness. Our proof-of-concept devices are graphene heterostructures with atomically thin boron…

To explore the potential of field-effect transistors (FETs) based on monolayers of the two-dimensional semiconducting channel(SC) for spintronics, the two most important issues are to ensure the formation of variable low resistive tunnel…

Materials and devices used in space and advanced energy systems are continuously exposed to high-energy photons and particles, leading to gradual changes in their structural and electronic properties. Gamma-ray exposure is particularly…

High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…