Related papers: Ultrahigh Transmission Optical Nanofibers
We present and analyze two pathways to produce commercial optical-fiber patch cords with stable long-term transmission in the ultraviolet (UV) at powers up to $\sim$ 200 mW, and typical bulk transmission between 66-75\%. Commercial fiber…
Tapered optical fibers (nanofibers) whose diameters are smaller than the optical wavelength are very fragile and can be easily destroyed if excessively heated by energy dissipated from the transmitted light. We present a technique for…
Thermally conductive polymers are of fundamental interest and can also be exploited in thermal management applications. Recent studies have shown stretched polymers can achieve high thermal conductivity. However, the transport mechanisms of…
Image projection through scattering media has applications ranging from light delivery through multimode fiber to near-eye displays. Conventional methods utilize the transmission matrix (TM) measured by interfering with a reference beam.…
We demonstrate fabrication of single-mode optical waveguides on lithium niobate on insulator (LNOI) by optical patterning combined with chemo-mechanical polishing. The fabricated LNOI waveguides have a nearly symmetric mode profile of a…
We propose a transmission line working at telecom wavelengths with cross section as small as ${\lambda}^2/39$, which is 1.6 times smaller than that of optimized silicon waveguide. The proposed line can be implemented as a subwavelength…
We cooled ultrathin tapered fibers to cryogenic temperatures and controllably coupled them with high-Q microsphere resonators at a wavelength close to the optical transition of diamond nitrogen vacancy centers. The 310-nm-diameter tapered…
The recent development of the superlattice nanowire pattern transfer (SNAP) technique allows for the fabrication of arrays of nanowires at a diameter, pitch, aspect ratio, and regularity beyond competing approaches. Here, we report the…
Low propagation loss in high confinement waveguides is critical for chip-based nonlinear photonics applications. Sophisticated fabrication processes which yield sub-nm roughness are generally needed to reduce scattering points at the…
We present a transparent conducting electrode composed of a periodic two-dimensional network of silver nanowires. Networks of Ag nanowires are made with wire diameters of 45-110 nm and pitch of 500, 700 and 1000 nm. Anomalous optical…
Light weight and mechanically robust cellular polymer nanofilms provide materials solutions to many cutting-edge technologies, such as high-flux membrane filtration, ultrathin flexible energy storage, and skin-conformable devices. However,…
Continuous Nb wires, 7-15 nm in diameter, have been fabricated by sputter-coating single fluorinated carbon nanotubes. Transmission electron microscopy revealed that the wires are polycrystalline, having grain sizes of about 5 nm. The…
We demonstrate adiabatically tapered fibers terminating in sub-micron tips that are clad with a higher-index material for coupling to an on-chip waveguide. This cladding enables coupling to a high-index waveguide without losing light to the…
In this paper we present a novel fabrication technique for silicon nitride (Si3N4) waveguides with a thickness of up to 900 nm, which are suitable for nonlinear optical applications. The fabrication method is based on etching trenches in…
Semiconducting single-walled carbon nanotubes are studied in the diffusive transport regime. The peak mobility is found to scale with the square of the nanotube diameter and inversely with temperature. The maximum conductance, corrected for…
The ability to spectrally translate lightwave signals in a compact, low-power platform is at the heart of the promise of nonlinear nanophotonic technologies. For example, a device to link the telecommunications band with visible and short…
We report record low loss silicon-on-sapphire nanowires for applications to mid infrared optics. We achieve propagation losses as low as 0.8dB/cm at 1550nm, 1.1 to 1.4dB/cm at 2080nm and < 2dB/cm at = 5.18 microns.
High-performance optical beam splitters are of fundamental importance for the development of advanced silicon photonics integrated circuits. However, due to the high refractive index contrast of the silicon-on-insulator platform, state of…
We fabricate an extremely thin optical fiber that supports a super-extended mode with a diameter as large as 13 times the optical wavelength, residing almost entirely outside the fiber and guided over thousands of wavelengths (5 mm), in…
We designed Si-based all-dielectric 1 $\times$ 2 TE and TM power splitters with various splitting ratios and simulated them using the inverse design of adjoint and numerical 3D finite-difference time-domain methods. The proposed devices…