Related papers: Ultrahigh Transmission Optical Nanofibers
We demonstrate the long-distance transmission of an ultra-stable optical frequency derived directly from a state-of-the-art optical frequency standard. Using an active stabilization system we deliver the frequency via a 146 km long…
A novel, highly flexible, conductive polymer-based fiber with high electric capacitance is reported. In its crossection the fiber features a periodic sequence of hundreds of conductive and isolating plastic layers positioned around metallic…
We report on the wafer scale fabrication of single mode low-loss lithium niobate on insulator waveguides utilizing a chemically amplified resist and an optimized dry etching method. The fabricated single mode waveguides are free of…
Transmission matrix measurements of multimode fibers are now routinely performed in numerous labs, enabling control of the electric field at the distal end of the fiber and paving the way for the potential application to ultrathin medical…
We demonstrate a metalens with NA = 0.98 in air, a bandwidth (FWHM) of 274 nm and a focusing efficiency of 67% at 532 nm wavelength, which is close to the transmission performance of a TiO2 metalens. Moreover, and uniquely so, our metalens…
On-chip optical resonators have the promise of revolutionizing numerous fields including metrology and sensing; however, their optical losses have always lagged behind their larger discrete resonator counterparts based on crystalline…
Multiwalled carbon nanotubes are shown to be ballistic conductors at room temperature, with mean free paths of the order of tens of microns. These experiments follow and extend the original experiments by Frank et al (Science, 280 1744…
Acoustic devices offer significant advantages in size and loss, making them ubiquitous for mobile radio frequency signal processing. However, the usable bandwidth is often limited to the achievable electromechanical coupling, setting a hard…
Optomechanical transduction is demonstrated for nanoscale torsional resonators evanescently coupled to optical microdisk whispering gallery mode resonators. The on-chip, integrated devices are measured using a fully fiber-based system,…
Enhanced manipulation and analysis of bio-particles using light confined in nano-scale dielectric structures has proceeded apace in the last several years. Small mode volumes, along with the lack of a need for bulky optical elements give…
We propose a method for coupling a tapered optical fiber to an inverted tapered SiN waveguide by fabricating a microfiber using 3D nanoprinting lithography. The microfiber consists of three parts: a tapered cladding cap, an S-bend, and a…
Transmission of UV light with high beam quality and pointing stability is desirable for many experiments in atomic, molecular and optical physics. In particular, laser cooling and coherent manipulation of trapped ions with transitions in…
The optical trapping of polymeric nanofibers and the characterization of the rotational dynamics are reported. A strategy to apply a torque to a polymer nanofiber, by tilting the trapped fibers using a symmetrical linear polarized Gaussian…
Superconductivity in quasi-one-dimensional systems is an significant but undervalued research field. In this work, based on the electron-phonon coupling mechanism, we systematically investigate the superconductivity in quasi-one-dimensional…
We propose an operating principle to achieve broadband and highly tunable mode conversion and amplification exploiting inter-modal four wave mixing in a multimode fiber. A bandwidth of 30 nanometers is demonstrated by properly designing a…
We demonstrated 22.05-THz four-band long-haul transmission with a S-to-U-band lumped repeater consisting of PPLN-based optical parametric amplifiers and EDFAs over an 80-km-span SMF link. The achieved net bitrate was 133.06 Tbps at 1040 km…
Dispersion engineering is essential to the performance of most modern optical systems including fiber-optic devices. Even though the chromatic dispersion of a meter-scale single-mode fiber used for endoscopic applications is negligible,…
Novel photonic nanowires were fabricated using low-index materials and tested in the near-infrared spectrum to assess their nonlinear optical properties. In this work, we argue the need to redefine the standard nonlinear figure of merit in…
Additive manufacturing, also known as 3D printing, is an advanced manufacturing technique that allows the fabrication of arbitrary macroscopic and microscopic objects. All 3D printing systems require large optical elements or nozzles in…
Efficient fiber-to-chip coupling has been a major hurdle to cost-effective packaging and scalable interconnections of photonic integrated circuits. Conventional photonic packaging methods relying on edge or grating coupling are constrained…