Related papers: Delay Analysis of Graphene Field-Effect Transistor…
The analytical model of the small-signal current and capacitance characteristics of RF graphene FET is presented. The model is based on explicit distributions of chemical potential in graphene channels (including ambipolar conductivity at…
The carrier mobility \mu of few-layer graphene (FLG) field-effect transistors increases ten-fold when the SiO_2 substrate is replaced by single-crystal epitaxial Pb(Zr_0.2Ti_0.8)O_3 (PZT). In the electron-only regime of the FLG, \mu reaches…
We report on spectroscopy results from the mid- to far-infrared on wafer-scale graphene, grown either epitaxially on silicon carbide, or by chemical vapor deposition. The free carrier absorption (Drude peak) is simultaneously obtained with…
Gate capacitances of back-gated nanowire field-effect transistors (NW-FETs) are calculated by means of finite element methods and the results are compared with analytical results of the ``metallic cylinder on an infinite metal plate…
We investigate the magnetotransport properties of a thin graphite wire resting on a silicon oxide substrate. The electric field effect is demonstrated with back and side gate electrodes. We study the conductance fluctuations as a function…
We obtain the output characteristics of graphene field-effect transistors by using the charge-control model for the current, based on the solution of the Boltzmann equation in the field-dependent relaxation time approximation. Closed…
We have fabricated and measured ballistic graphene transistors with two oblique gates that can be independently biased. The gate lengths are about 38 nm and are separated by a distance of 30 nm, the tilting angle being of 45o with respect…
We introduce a new method for hardware non-uniform random number generation based on the transfer characteristics of graphene field-effect transistors (GFETs) which requires as few as two transistors and a resistor (or transimpedance…
It has been argued that current saturation in graphene field-effect transistors (GFETs) is needed to get the highest possible maximum oscillation frequency (fmax). This paper numerically investigates whether velocity saturation can help to…
Graphene field effect transistors commonly comprise graphene flakes lying on SiO2 surfaces. The gate-voltage dependent conductance shows hysteresis depending on the gate sweeping rate/range. It is shown here that the transistors exhibit two…
Substrate plays a crucial role in determining transport and low frequency noise behavior of graphene field effect devices. Typically, heavily dope Si/SiO$_2$ substrate is used to fabricate these devices for efficient gating.…
The use of two truly two-dimensional gapless semiconductors, monolayer and bilayer graphene, as current-carrying components in field-effect transistors (FET) gives access to new types of nanoelectronic devices. Here, we report on the…
We present transport measurements on quantum dots of sizes 45, 60 and 80 nm etched with an Ar/O2-plasma into a single graphene sheet, allowing a size comparison avoiding effects from different graphene flakes. The transport gaps and…
Tunneling field-effect transistors (FETs) have been intensely explored recently due to its potential to address power concerns in nanoelectronics. The recently discovered graphene nanoribbon (GNR) is ideal for tunneling FETs due to its…
Graphene is ideally suited for optoelectronic applications. It offers absorption at telecom wavelengths, high-frequency operation and CMOS-compatibility. We report optoelectronic mixing up to to 67GHz using a back-gated graphene field…
We describe a simple and scalable method for the transfer of CVD graphene for the fabrication of field effect transistors. This is a dry process that uses a modified RCA cleaning step to improve the surface quality. In contrast to…
The intrinsic values of the carriers mobility and density of the graphene layers inside graphite, the well known structure built on these layers in the Bernal stacking configuration, are not well known mainly because most of the research…
Electron devices based on graphene have lately received a considerable interest; in fact, they could represent the ultimate miniaturization, since the active area is only one atom tick. However, the gapless dispersion relation of graphene…
This paper introduces a design method for densergraph-frequency graph Fourier frames (DGFFs) to enhance graph signal processing and analysis. The graph Fourier transform (GFT) enables us to analyze graph signals in the graph spectral domain…
The metal-graphene contact resistance is one of the major limiting factors toward the technological exploitation of graphene in electronic devices and sensors. A high contact resistance can be detrimental to device performance and spoil the…