Related papers: Near-field scanning microwave microscope for inter…
We have carried out non-linear microwave (8 GHz) surface impedance measurements of three YBaCuO thin films in dc magnetic fields $H_{dc}$ (parallel to c axis) up to 12 mT using a coplanar resonator technique. In zero dc field the three…
In this study we investigate magnetic properties, surface morphology and crystal structure in iron nanoclusters electrodeposited on lightly-doped (100) n-type silicon substrates. Our goal is to investigate the spin injection and detection…
Niobium-based Superconducting Radio Frequency (SRF) cavity performance is sensitive to localized defects that give rise to quenches at high accelerating gradients. In order to identify these material defects on bulk Nb surfaces at their…
Simple broadband microwave interconnects are needed for increasing the size of focal plane heterodyne radiometer arrays. We have measured loss and cross-talk for arrays of microstrip transmission lines in flex circuit technology at 297 and…
In this paper, to accurately characterize the low inter-mode coupling of the weakly-coupled few mode fibers (FMFs), we propose a modified inter-mode coupling characterization method based on swept-wavelength interferometry measurement, in…
The measurement of micron-sized mechanical resonators by electrical techniques is difficult, because of the combination of a high frequency and a small mechanical displacement which together suppress the electromechanical coupling. The only…
An apparatus was developed to obtain, for the first time, 2D maps of the surface resistance of the inner surface of an operating superconducting radio-frequency niobium cavity by a low-temperature laser scanning microscopy technique. This…
We propose and design an ultra-compact and broadband tunable multimode interference (MMI) splitter in mid-infrared based on graphene plasmonic waveguides. The size of the device is only 0.56{\mu}m*1.2{\mu}m, which corresponds to device area…
We present a high-sensitivity microwave vector detection system for studying the low-dimensional electron system embedded in the gaps of a coplanar waveguide at low temperatures. Using this system, we have achieved 0.005% and…
This mini review focuses on conductance measurements through molecular junctions containing few tens of molecules, which are fabricated along two approaches: (i) conducting atomic force microscope contacting a self-assembled monolayers on…
It is important for modern scanning microwave microscopes to overcome the effect of the surface roughness. Here, we report microwave conductivity imaging of the phase-separated iron chalcogenide K$_x$Fe$_y$Se$_2$ ($x=0.8$, $y=1.6$-$2$), in…
We perform broadband phase sensitive measurements of the reflection coefficient from 45 MHz up to 20 GHz employing a vector network analyzer with a 2.4 mm coaxial sensor which is terminated by the sample under test. While the material…
Driven by interactions due to the charge, spin, orbital, and lattice degrees of freedom, nanoscale inhomogeneity has emerged as a new theme for materials with novel properties near multiphase boundaries. As vividly demonstrated in complex…
Optical excitation and subsequent decay of graphene plasmons can produce a significant increase in charge-carrier temperature. An efficient method to convert this temperature elevation into a measurable electrical signal at room temperature…
Outlined here is a technique for sub-wavelength infrared surface imaging performed using a phase matched optical parametric oscillator laser and an atomic force microscope as the detection mechanism. The technique uses a novel surface…
We describe a new type of scanning probe microscope based on a superconducting quantum interference device (SQUID) that resides on the apex of a sharp tip. The SQUID-on-tip is glued to a quartz tuning fork which allows scanning at a…
We report on imaging of microwave (MW) magnetic fields using a magnetometer based on the electron spin of a nitrogen vacancy center in diamond. We quantitatively image the magnetic field generated by high frequency (GHz) MW current with…
For nanotechnology nodes, the feature size is shrunk rapidly, the wire becomes narrow and thin, it leads to high RC parasitic, especially for resistance. The overall system performance are dominated by interconnect rather than device. As…
We report on the fabrication and characterization of single-photon-sensitive WSi superconducting detectors with wire widths from 1 {\mu}m to 3 {\mu}m. The devices achieve saturated internal detection efficiency at 1.55 {\mu}m wavelength and…
This tutorial paper shows how to compute the DC (or low-frequency) resistance, inductance and capacitance of a pair of parallel wires using the finite element method. A three-dimensional infinite domain (open boundary) modeling of…