Related papers: Ultimate RF Performance Potential of Carbon Electr…
We report the radio-frequency performance of carbon nanotube array transistors that have been realized through the aligned assembly of highly separated, semiconducting carbon nanotubes on a fully scalable device platform. At a gate length…
The development of flexible electronics operating at radio-frequencies (RF) requires materials that combine excellent electronic performance and the ability to withstand high levels of strain. In this work, we fabricate graphene…
A graphene field-effect-transistor (GFET) model calibrated with extracted device parameters and a commercial 65 nm silicon MOSFET model are compared with respect to their radio frequency behavior. GFETs slightly lag behind CMOS in terms of…
A dual-gate graphene field-effect transistors is presented, which shows improved RF performance by reducing the access resistance using electrostatic doping. With a carrier mobility of 2700 cm2/Vs, a cutoff frequency of 50 GHz is…
Graphene-based devices are planned to augment the functionality of Si and III-V based technology in radio-frequency (RF) electronics. The expectations in designing graphene {field-effect} transistors (GFETs) with enhanced RF performance…
High-frequency performance of graphene field-effect transistors (GFETs) with boron-nitride gate dielectrics is investigated. Devices show saturating IV characteristics and fmax values as high as 34 GHz at 600-nm channel length. Bias…
The development of the sixth generation of wireless communications technology (6G) requires terminals that can operate at frequencies above 100 GHz. For human-centric applications, these terminals should also be flexible and have low power.…
Ferroelectric field-effect transistors (FeFET) with two-dimensional (2D) semiconductor channels are promising low-power, embedded non-volatile memory (NVM) candidates for next-generation in-memory computing. However, the performance of…
High performance enhancement mode semiconducting carbon nanotube field-effect transistors (CNTFETs) are obtained by combining ohmic metal-tube contacts, high dielectric constant HfO2 films as gate insulators, and electrostatically doped…
With decreasing device dimensions, the performance of carbon nanotube field-effect transistors (CNFETs) is limited by high Off currents except at low drain voltages. We show that an asymmetric design improves the performance, reducing Off…
We propose Graphene Klein tunnel transistors (GKTFET) as a way to enforce current saturation while maintaining large mobility for high speed radio frequency (RF) applications. The GKTFET consists of a sequence of angled graphene p-n…
High performance p- and n-type single-walled carbon nanotube (SWNT) field-effect transistors (FETs) are obtained by using high and low work function metals, Pd and Al as source/drain (S/D) electrodes respectively. Ohmic contacts made to…
A novel nanoelectronic device is constructed by graphyne that is robustly connected between graphene electrodes, where graphyne is composed of hexagonal carbon rings and carbon chains. Owing to similarities between the bond lengths and unit…
We have investigated radio-frequency single-electron transistor (RF-SET) operation of single-walled carbon nanotube quantum dots in the strong tunneling regime. At 4.2 K and carrier frequency 754.2 MHz, we reach a charge sensitivity of…
High frequency performance limits of graphene field-effect transistors (FETs) down to a channel length of 20nm are examined by using self-consistent quantum simulations. The results indicate that although Klein band-to-band tunneling is…
In the past decade, semiconducting carbon nanotube thin films have been recognized as contending materials for wide-ranging applications in electronics, energy, and sensing. In particular, improvements in large-area flexible electronics…
New technologies are necessary for the unprecedented expansion of connectivity and communications in the modern technological society. The specific needs of wireless communication systems in 5G and beyond, as well as devices for the future…
In this letter, we demonstrate the first BN/Graphene/BN field effect transistor for RF applications. The BN/Graphene/BN structure can preserve the high mobility of graphene, even when it is sandwiched between a substrate and a gate…
Sub-10nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10^6 and on-state current density as high as…
The performance limits of the multilayer graphene nanoribbon (GNR) field-effect transistor (FET) are assessed and compared to those of monolayer GNR FET and carbon nanotube (CNT) FET. The results show that with a thin high-k gate insulator…