Related papers: Thermal-noise limited laser stabilization to a cry…
Frequency stabilisation of lasers to optical reference cavities is an established method to achieve state-of-the-art stability. The strengths of this method are the high discriminator coefficient of optical cavities, and the low-noise…
Self-injection locking of a diode laser to a high-quality-factor microresonator is widely used for frequency stabilization and linewidth narrowing. We constructed several microresonator-based laser sources with measured instantaneous…
Cryogenic single-crystal optical cavities have the potential to provide highest dimensional stability. We have investigated the long-term performance of an ultra-stable laser system which is stabilized to a single-crystal silicon cavity…
We present the characterization of 8-12 GHz whispering gallery mode resonators machined in high-quality sapphire crystals elaborated with different growth techniques. These microwave resonators are intended to constitute the reference…
Developments in ultrastable lasers have fueled remarkable advances in optical frequency metrology and quantum science. A key ingredient in further improving laser frequency stability is the use of low-noise mirror materials such as AlGaAs…
Astrophysical observations suggest the existence of an unknown kind of matter in the Universe, in the frame of the $\Lambda$CDM model. The research field of dark matter covers an energy scale going from massive objects to ultra-light scalar…
Thermally induced fluctuations impose a fundamental limit on precision measurement. In optical interferometry, the current bounds of stability and sensitivity are dictated by the excess mechanical damping of the high-reflectivity coatings…
In this article, we explore how cryogenic cooling of the Ti:sapphire laser crystal greatly reduces thermal lensing by over an order of magnitude because of two factors: (i) the increase in the thermal conductivity of the crystal, and (ii)…
The microwave properties of a crystalline sapphire dielectric whispering gallery mode resonator have been measured at very low excitation strength (E/hf=1) and low temperatures (T = 30 mK). The measurements were sensitive enough to observe…
A stable optical resonator has been built using a 30 micrometer-wide, metal-coated microcantilever as one mirror. The second mirror was a 12.7 mm-diameter concave dielectric mirror. By positioning the two mirrors 75 mm apart in a…
We have tuned the whispering gallery modes of a fused silica microresonator over nearly 1 nm at 800 nm, i.e. over 0.5 FSR or 10^6 linewidths of the resonator. This has been achieved by a new method based on the stretching of a two-stem…
We report on visible light emission from Si-nanocrystal based optically active microdisk resonators. The room temperature photoluminescence (PL) from single microdisks shows the characteristic modal structure of whispering-gallery modes.…
Typical microresonators exhibit a large frequency spacing between resonances and a limited tunability. This impedes their use in a large class of applications which require a resonance of the microcavity to coincide with a predetermined…
We present a painless, almost-free upgrade to present extended cavity diode lasers (ECDLs), which improves the long term mode-hop free performance by stabilizing the resonance of the internal cavity to the external cavity. This…
Tunable light sources are a key enabling technology for many applications such as ranging, spectroscopy, optical coherence tomography, digital imaging and interferometry. For miniaturized laser devices, whispering gallery resonator lasers…
Optical whispering-gallery microresonators are useful tools in microphotonics, and nonlinear optics at very low threshold powers. Here, we present details about the fabrication of ultra-high-Q whispering-gallery-mode resonators made by…
We present a method for making microbubble whispering gallery resonators (WGRs) from tellurite, which is a soft glass, using a CO$_2$ laser. The customized fabrication process permits us to process glasses with low melting points into…
A Cryogenic Sapphire Oscillator has been implemented at 11.2 GHz using a low-vibration design pulse-tube cryocooler. Compared with a state-of-the-art liquid helium cooled CSO in the same laboratory, the square root Allan variance of their…
The tunability of an optical cavity is an essential requirement for many areas of research. Here, we use the Pound-Drever-Hall technique to lock a laser to a whispering gallery mode (WGM) of a microbubble resonator, to show that linear…
We propose a method for thermal expansion compensation of reference monolithic optical cavities for laser frequency stabilization. Two schemes of optical cavities are considered: a Fabry-Perot interferometer with a crimp ring and a…