Related papers: Indium-Gallium Segregation in CuIn$_{x}$Ga$_{1-x}$…
Cu(In,Ga)Se2 (CIGSe)-based solar cells are promising candidates for efficient sunlight harvesting. However, their complex composition and microstructure can change under operation conditions, for instance heating from sun light illumination…
Power-conversion efficiency is a critical factor for the wider adoption of solar-cell modules. Thin-film solar cells are cheap and easy to manufacture, but their efficiencies are low compared to crystalline-silicon solar cells and need to…
Sulfide chalcopyrite Cu(In,Ga)S2 (CIGS) is a wide bandgap semiconductor suitable for the top cell of a tandem solar device. Here we demonstrate significant improvements in absorber quality by alloying with Ag to form (Ag,Cu)(In,Ga)S2…
Alloying Ag into Cu(In,Ga)Se$_2$ has enabled record solar-cell efficiencies ($\sim23.6\%$), yet their long-term stability remains in question because initio calculations predict a Ag-Cu miscibility gap near ambient temperature. By…
This paper proposes an efficient three-layered p-GaAs/p-CIGS/n-CdS (PPN), a unique solar cell architecture. Copper indium gallium selenide (CIGS)-based solar cells exhibit substantial performance than the ones utilizing cadmium sulfide…
Space-resolved X-ray diffraction measurements performed on gradient-etched CuInGaSe2 (CIGS) solar cells provide information about stress and texture depth profiles in the absorber layer. An important parameter for CIGS layer growth…
Thin-film solar cells reach high efficiencies and have a low carbon footprint in production. Tandem solar cells have the potential to significantly increase the efficiency of this technology, where the bottom-cell is generally composed of a…
The power conversion efficiency of an ultrathin CIGS solar cell was maximized using a coupled optoelectronic model to determine the optimal bandgap grading of the nonhomogeneous CIGS layer in the thickness direction. The bandgap of the CIGS…
Wide-gap Cu(In,Ga)S2 solar cells with In2O3:Sn (ITO) as transparent back contact are evaluated for the application as top cells in tandem devices. The effect of Na on the solar cell performance is investigated by supplying additional Na by…
This study underscores the pivotal role of sodium (Na) supply in optimizing the optoelectronic properties of wide bandgap (~1.6 eV) Cu(In,Ga)S2 (CIGS) thin film absorbers for high efficiency solar cells. Our findings demonstrate that the…
Reducing the thickness of Cu(In,Ga)Se2 solar cells is a key objective in order to reduce production cost and to improve sustainability. The major challenge for sub-micron Cu(In,Ga)Se2 cells is the recombination at the backside. In standard…
Choosing the Indium Gallium Nitride (InGaN) ternary alloy for thin films solar cells might yield high benefits concerning efficiency and reliability, because its bandgap can be tuned through the Indium composition and radiations have little…
We report a proof-of-concept two-terminal perovskite/Cu(In, Ga)Se2 (CIGS) monolithic thin-film tandem solar cell grown on ultra-thin (30-microns thick), light-weight, and flexible polyimide foil with a steady-state power conversion…
We present direct measurements of depth-resolved band gap variations of CuIn(1-x)Ga(x)Se2 thin-film solar cell absorbers. A new measurement technique combining parallel measurements of local thin-film interference and spectral…
A two-dimensional model was developed to simulate the optoelectronic characteristics of indium-gallium-nitride (InGaN), thin-film, Schottky-barrier solar cells. The solar cells comprise a window, designed to reduce the reflection of…
In this paper, we present a physics-based analytical model for CIGS solar cells that describes the illumination- and temperature-dependent current-voltage (I-V) characteristics and accounts for the statistical shunt variation of each cell.…
Influence of composition and external hydrostatic pressure on the structural, electronic, and optical properties of the CuGa1-xAlxS2 (x=0, 0.25, 0.5, 0.75, 1.0) chalcopyrite semiconductor was analyzed by means of the first-principles…
Selenium is an elemental semiconductor with a wide bandgap suitable for a range of optoelectronic and solar energy conversion technologies. However, developing such applications requires an in-depth understanding of the fundamental material…
In this article, we demonstrate the design and simulation of a highly-efficient n-CdS/p-CIGS/p+-CGS dual heterojunction solar cell. The simulation was performed using SCAPS-1D software with reported experimental physical parameters. The…
Record efficiency in chalcopyrite-based solar cells Cu(In,Ga)(S,Se)2 is achieved using a gallium gradient to increase the band gap of the absorber towards the back side. Although this structure has successfully reduced recombination at the…