Related papers: Simulation of hydrogenated graphene Field-Effect T…

The entire graphene field-effect-transistor (FET) devices first fabricated on SiO2/Si are peeled from the surface and placed on a different wafer. Both longitudinal and transverse resistivity measurements of the devices before and after the…

In this letter, we demonstrate the first BN/Graphene/BN field effect transistor for RF applications. The BN/Graphene/BN structure can preserve the high mobility of graphene, even when it is sandwiched between a substrate and a gate…

We revisit the theory of the pseudo magnetic field as induced by strain in graphene using the tight-binding approach. A systematic expansion of the hopping parameter and the deformation of the lattice vectors is presented from which we…

Designing platforms to control phase-coherence and interference of electron waves is a cornerstone for future quantum electronics, computing or sensing. Nanoporous graphene (NPG) consisting of linked graphene nanoribbons has recently been…

In view of the appreciable semiconducting gap of 0.26 eV observed in recent experiments, epitaxial graphene on a SiC substrate seems a promising channel material for FETs. Indeed, it is two-dimensional - and therefore does not require…

We demonstrate with a fully quantum-mechanical approach that graphene can function as gate-controllable transistors for pumped spin currents, i.e., a stream of angular momentum induced by the precession of adjacent magnetizations, which…

Graphene solution-gated field-effect transistors (SGFETs) are a promising platform for the recording of cell action potentials due to the intrinsic high signal amplification of graphene transistors. In addition, graphene technology fulfils…

Hydrogenation has proven to be an effective tool to open the bandgap of graphene. In the present density functional study we demonstrate that single-side-hydrogenated graphene is a semiconductor with an indirect bandgap of 1.89 eV, in…

In this work, a modified, lumped element graphene field effect device model is presented. The model is based on the "Top-of-the-barrier" approach which is usually valid only for ballistic graphene nanotransistors. Proper modifications are…

Realizing flexible strain sensor with high sensitivity and tunable gauge factor is a challenge. To meet this challenge, we report an ionic liquid gated three-dimensional graphene field effect strain sensor. The charge carrier concentration…

Graphene nanoribbon (GNR) field-effect transistors (FETs) with widths down to 12 nm have been fabricated by electron beam lithography using a wafer-scale chemical vapor deposition (CVD) process to form the graphene. The GNR FETs show…

We present a circuit-compatible compact model of the intrinsic capacitances of graphene field-effect transistors (GFETs). Together with a compact drain current model, a large-signal model of GFETs is developed combining both models as a…

In this manuscript, we present a field effect transistor with a channel consisting of a two-dimensional electron gas located at the interface between an ultrathin metallic film of Ni and a p-type Si(111) substrate. We have demonstrated that…

The quality of graphene in nanodevices has increased hugely thanks to the use of hexagonal boron nitride as a supporting layer. This paper studies to which extent hBN together with channel length scaling can be exploited in graphene field…

We argue that twisted graphene nanoribbons subjected to a transverse electric field can operate as a variety of nanoelectronic devices, such as tunable tunnel diodes with current-voltage characteristics controlled by the transverse field.…

Graphene-based devices are planned to augment the functionality of Si and III-V based technology in radio-frequency (RF) electronics. The expectations in designing graphene {field-effect} transistors (GFETs) with enhanced RF performance…

This paper reviews the experimental and theoretical state of the art in ballistic hot electron transistors that utilize two-dimensional base contacts made from graphene, i.e. graphene base transistors (GBTs). Early performance predictions…

We describe a simple and scalable method for the transfer of CVD graphene for the fabrication of field effect transistors. This is a dry process that uses a modified RCA cleaning step to improve the surface quality. In contrast to…

The ability to perform first-principles calculations of electronic and vibrational properties of two-dimensional heterostructures in a field-effect setup is crucial for the understanding and design of next-generation devices. We present…

Artificial graphene consisting of honeycomb lattices other than the atomic layer of carbon has been shown to exhibit electronic properties similar to real graphene. Here, we reverse the argument to show that transport properties of real…