Related papers: Device Model for Graphene Nanoribbon Phototransist…
Graphene nanoribbons (GNRs) are natural waveguides for electrons in graphene. Nevertheless, unlike micron-sized samples, conductance is nearly suppressed in these narrow graphene stripes, mainly due to scattering with edge disorder…
The directional control of light in miniaturized plasmonic waveguides holds appealing possibilities for emerging nanophotonic technologies, but is hindered by the intrinsic reciprocal optical response of conventional plasmonic materials.…
Graphene nanoribbons with armchair edges (AGNRs) have bandgaps that can be flexibly tuned via the ribbon width. A junction made of a narrower AGNR sandwiched between two wider AGNR leads was recently reported to possess two perfect…
This paper reviews the current status of graphene transistors as potential supplement to silicon CMOS technology. A short overview of graphene manufacturing and metrology methods is followed by an introduction of macroscopic graphene field…
A spin field effect transistor (FET) is proposed by utilizing a graphene nanoribbon as the channel. Similar to the conventional spin FETs, the device involves ferromagnetic metals as a source and drain; they, in turn, are connected to the…
We present a new method of producing a densely ordered array of epitaxial graphene nanoribbons (GNRs) using vicinal SiC surfaces as a template, which consist of ordered pairs of (0001) terraces and nanofacets. Controlled selective growth of…
We propose to utilize multiple-graphene-layer structures with lateral p-i-n junctions for terahertz (THz) and infrared (IR) photodetection and substantiate the operation of photodetectors based on these structures. Using the developed…
The successful fabrication of single layer graphene has greatly stimulated the progress of the research on graphene. In this article, focusing on the basic electronic and transport properties of graphene nanoribbons (GNRs), we review the…
Graphene's optical properties in the infrared and terahertz can be tailored and enhanced by patterning graphene into periodic metamaterials with sub-wavelength feature sizes. Here we demonstrate polarization sensitive and gate tunable…
Graphene field-effect transistors are fabricated utilizing single-crystal hexagonal boron nitride (h-BN), an insulating isomorph of graphene, as the gate dielectric. The devices exhibit mobility values exceeding 10,000 cm2/V-sec and current…
In recent years, graphene Field-Effect-Transistors (GFETs) have demonstrated an outstanding potential for Terahertz (THz) photodetection due to their fast response and high-sensitivity. Such features are essential to enable emerging THz…
In this work, a modified, lumped element graphene field effect device model is presented. The model is based on the "Top-of-the-barrier" approach which is usually valid only for ballistic graphene nanotransistors. Proper modifications are…
The practical realization of nano-scale electronics faces two major challenges: the precise engineering of the building blocks and their assembly into functional circuits. In spite of the exceptional electronic properties of carbon…
It is usually assumed that tunneling current is fairly independent of temperature. By performing an atomistic transport simulation, we show, to the contrary, that the subthreshold tunneling current in a graphene nanoribbon (GNR)…
Bottom-up synthesized GNRs and GNR heterostructures have promising electronic properties for high performance field effect transistors (FETs) and ultra-low power devices such as tunnelling FETs. However, the short length and wide band gap…
Nanoporous graphene (NPG), consisting of ordered arrays of nanopores separated by graphene nanoribbons was recently realized using a bottom-up synthesis method (Science 360(2018), 199). In this work we accordingly explored the mechanical…
Photodetectors are typically based on photocurrent generation from electron-hole pairs in semiconductor structures and on bolometry for wavelengths that are below bandgap absorption. In both cases, resonant plasmonic and nanophotonic…
In a bridge configuration, a single graphene nanoribbon (GNR) is positioned with a picometer precision over a trench in between two monoatomic steps on an Au(111) surface. This GNR molecular wire adopts a deformed conformation towards the…
Graphene-based electromechanical resonators have attracted much interest recently because of the outstanding mechanical and electrical properties of graphene and their various applications. However, the coupling between mechanical motion…
The prospects of using nanofilms of indium-containing III-V semiconductors, gold and single-layer graphene in magnetic field sensors, intended for application in radiation environment were evaluated on the results of testing in neutron…