Related papers: An Improved Process for Fabricating High-Mobility …

Monolayer WSe2 is a two dimensional (2D) semiconductor with a direct bandgap, and it has been recently explored as a promising material for electronics and optoelectronics. Low field effect mobility is the main constraint preventing WSe2…

we have fabricated transparent electronic devices based on graphene materials with thickness down to one single atomic layer by the transfer printing method. The resulting printed graphene devices retain high field effect mobility and have…

This study investigates a high Q-factor spiral inductor fabricated by the CMOS (complementary metal oxide semiconductor) process and a post-process. The spiral inductor is manufactured on silicon substrate using the 0.35 micrometers CMOS…

We demonstrate tunable solid state and flexible graphene field effect devices (FEDs) fabricated using a poly(methylmethacrylate) (PMMA) and lithium fluoride (LiF) composite dielectric. Increasing the concentration of LiF in the composite…

The MOS devices are the basic building block of any digital and analog circuits, where silicon (Si) is the most commonly used material. The International Technology Roadmap Semiconductor (ITRS) report predicts the gate length of the MOS…

Thanks to recent progress in terms of materials properties, polymer field-effect transistors (FETs) operating in the MHz range can be achieved. However, further development towards challenging frequency ranges, for a field accustomed to…

We demonstrate high yield fabrication of field effect transistors (FET) using chemically reduced graphene oxide (RGO) sheets suspended in water assembled via dielectrophoresis. The two terminal resistances of the devices were improved by an…

In this paper, the dynamics of bias stress phenomenon in Sexithiophene (T6) Field Effect Transistors (FETs) has been investigated. T6 FETs have been fabricated by vacuum depositing films with thickness from 10 nm to 130 nm on Si/SiO2…

We present a simple but powerful method to determine the thicknesses of the accumulation and depletion layers and the distribution curve of injected carriers in organic field effect transistors. The conductivity of organic semiconductors in…

This study details the use of printing and other additive processes to fabricate a novel amperometric glucose sensor. The sensor was fabricated using a Au coated 12.7 micron polyimide film as a starting material, where micro-contact…

Fueled by the 5G revolution, the demand for advanced radio frequency micro-electromechanical systems (MEMS) based on AlScN is growing rapidly. However, synthesizing high-quality, textured AlScN thin films is challenging. Current approaches…

Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized…

In this work we demonstrate a new Field Effect Transistor device concept based on hydrogen-terminated diamond (H-diamond) that operates in an Accumulation Channel rather than Transfer Doping regime. Our FET devices demonstrate both extreme…

We report the transport properties of mechanically exfoliated few-layer SnSe$_{2}$ flakes, whose mobility is found with four probe measurements to be ~ 85 cm$^{2}$V$^{-1}$s$^{-1}$ at 300 K, higher than those of the majority of few-layer…

In 1963, Moll and Tarui suggested that the field-effect conductance of a semiconductor could be controlled by the remanent polarization of a ferroelectric (FE) material to create a ferroelectric field-effect transistor (FE-FET). However,…

A field-effect transistor that employs a perovskite-type SrTiO3 single crystal as the semiconducting channel is revealed to function as n-type accumulation-mode device with characteristics similar to that of organic FET's. The device was…

We have demonstrated atomically thin, quantum capacitance-limited, field-effect transistors (FETs) that enable the detection of pH changes with ~75-fold higher sensitivity (4.4 V/pH) over the Nernst value of 59 mV/pH at room temperature…

Graphene is a promising material for applications as a channel in graphene field-effect transistors (GFETs) which may be used as a building block for optoelectronics, high-frequency devices and sensors. However, these devices require gate…

We invented a novel method to fabricate graphene transistors on oxidized silicon wafers without the need to transfer graphene layers. By means of catalytic chemical vapor deposition (CCVD) the in-situ grown bilayer graphene transistors…

The recent observation of fractional quantum Hall effect in high mobility suspended graphene devices introduced a new direction in graphene physics, the field of electron-electron interaction dynamics. However, the technique used currently…