相关论文: Adhesive Contact to a Coated Elastic Substrate

With the development of multi-layer elastic systems in the field of engineering mechanics, the corresponding variational inequality theory and algorithm design have received more attention and research. In this study, a class of equivalent…

Current engineering wear models are often based on empirical parameters rather than built upon physical considerations. Here, we look for a physical description of adhesive wear at the microscale, at which the interaction between two…

Contact mechanics-based models for the friction of nominally flat rough surfaces have not been able to adequately capture certain key experimentally observed phenomenona, such as the transition from a static friction peak to a lower level…

A general model covering a large variety of the so-called adhesive or cohesive, possibly also frictional, contact interfaces between visco-elastic bodies with inertia considered in a thermodynamical context is presented. A semi-implicit…

Recently, there has been some debate over the effect of adhesion on the contact of rough surfaces. Classical asperity theories predict, in agreement with experimental observations, that adhesion is always destroyed by roughness except if…

Solid contacts involving soft materials are important in mechanical engineering or biomechanics. Experimentally, such contacts have been shown to shrink significantly under shear, an effect which is usually explained using adhesion models.…

Adhesion hysteresis can be caused by elastic instabilities that are triggered by surface roughness or chemical heterogeneity. However, the role of these instabilities in adhesion hysteresis remains poorly understood because we lack…

An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…

We propose a model for unilateral contact with adhesion between a viscoelastic body and a rigid support, encompassing thermal and frictional effects. Following the approach by M. Fremond, adhesion is described in terms of a surface damage…

In this article, we extended our approach, that is mentioned in part 1, to model the indentation of an adhesive beam by a rigid cylindrical punch. We considered clamped and simply supported beams for this study. We first modeled these beams…

The hyperelastic materials would contribute to the intricacies of rough surface contact, primarily due to the heightened nonlinearity caused by stress concentration. In our previous research, an incremental contact model tailored for…

A partially-wetting liquid can deform the underlying elastic substrate upon which it rests. This situation requires the development of theoretical models to describe the wetting forces imparted by the drop onto the solid substrate,…

We study the frictional adhesive contact of a rigid insulating sphere sliding past a multiferroic coating deposed onto a rigid substrate, based on the hybrid element method (HEM). The adhesion behavior is described based on the…

We study the mechanics of a reversible decohesion (unzipping) of an elastic layer subjected to quasi-static end-point loading. At the micro level the system is simulated by an elastic chain of particles interacting with a rigid foundation…

We study experimentally and theoretically the equilibrium adhesive contact between a smooth glass lens and a rough rubber surface textured with spherical microasperities with controlled height and spatial distributions. Measurements of the…

An adhesive unilateral contact of elastic bodies with a small viscosity in the linear Kelvin-Voigt rheology at small strains is scrutinized. The flow-rule for debonding the adhesive is considered rate-independent and unidirectional, and…

A quasistatic unilateral frictionless contact problem for a rigid axisymmetric indenter pressed into a homogeneous, linearly elastic and transversely isotropic elastic layer bonded to a homogeneous, linearly elastic and transversely…

In the present short note, we generalize simple approximate Johnson-Jaffar-Barber solutions for the indentation by a rigid punch of a thin elastic layer on a rigid foundation to the case of adhesion. This could be an interesting geometry…

We study the adhesive contact between elastic solids with randomly rough, self affine fractal surfaces. We present molecular dynamics (MD) simulation results for the interfacial stress distribution and the wall-wall separation. We compare…

Contact and related phenomena, such as friction, wear or elastohydrodynamic lubrication, remain as one of the most challenging problem classes in nonlinear solid and structural mechanics. In the context of their computational treatment with…