相关论文: A magnetic liquid deformable mirror for high strok…
We present the research status of a deformable mirror made of a magnetic liquid whose surface is actuated by a triangular array of small current carrying coils. We demonstrate that the mirror can correct a 11 microns low order aberrated…
The trend towards ever larger telescopes and more advanced adaptive optics systems is driving the need for deformable mirrors with a large number of low cost actuators. Liquid mirrors have long been recognized a potential low cost…
Deformable mirrors are increasingly used in astronomy. However, they still are limited in stroke for active correction of high amplitude optical aberrations. Magnetic Liquid deformable mirrors (MLDMs) are a new technology that has…
We present the experimental performance of a 91-actuator deformable mirror made of a magnetic liquid (ferrofluid) using a new technique that linearizes the response of the mirror by superposing a uniform magnetic field to the one produced…
We describe a new technology for the fabrication of inexpensive high-quality mirrors. We begin by chemically producing a large number of metallic nanoparticles coated with organic ligands. The particles are then spread on a liquid substrate…
Deformable Mirrors (DMs) have wide applications ranging from astronomical imaging to laser communications and vision science. However, they often require bulky multi-channel cables for delivering high power to their drive actuators. A low…
A new design is proposed for large (up to 6-m) liquid mirror containers. The design uses Kevlar, foam and aluminum, as in previous designs, but with a different configuration that makes the container lighter, stronger and more rigid. The…
In this paper we present a Deformable Mirror (DM) based on the continuous voltage distribution over a resistive layer. This DM can correct the low order aberrations (defocus, astigmatism, coma and spherical aberration) using three…
Digital micromirror devices have gained popularity in wavefront shaping, offering a high frame rate alternative to liquid crystal spatial light modulators. They are relatively inexpensive, offer high resolution, are easy to operate, and a…
Dielectric mirrors comprising thin-film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here we investigate potential problems that can arise when…
We investigate the aspherization of an active mirror for correcting third and fifth-order aberrations. We use a stainless steel AISI 420 mirror with a controlled pressure load, two series of 12-punctual radial positions of force application…
The influence of a deformable mirror on spatial light modulation in ultrafast lasers processing is demonstrated. The deformable mirror was integrated into an optical setup which contains an additional lens for generating a nearly linear…
The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common…
A Deformable Mirror (DM) is an important component of an Adaptive Optics system. It is known that an on-axis spherical/parabolic optical component, placed at an angle to the incident beam introduces defocus as well as astigmatism in the…
We report on the response of a thin layer of ferrofluid to a spatially modulated magnetic field. This field is generated by means of a constant current in a special arrangement of aluminum wires. The full surface profile of the liquid layer…
We have built and tested a 3.7-m diameter liquid mirror that rotates on a ball bearing. We have carried out extensive optical tests. We find that although the ball bearing has a poor quality, the quality of the mirror, with mercury layers…
We discuss a new technology that promises large inexpensive mirrors. We argue that it should be possible to tilt a rotating viscous liquid by perhaps as much as a few tens of degrees. The tilted liquid parabolic surface is used as the…
The surface of a spinning liquid takes the shape of a paraboloid that can be used as a reflecting mirror. This very old and nearly forgotten concept has recently been revived and I review its present status. Extensive interferometric tests…
Carbon fibre composite technology for lightweight mirrors is gaining increasing interest in the space- and ground-based astronomical communities for its low weight, ease of manufacturing, excellent thermal qualities and robustness. We…
We introduce the concept of non-uniform metamirrors (full-reflection metasurfaces) providing full control of reflected wave fronts independently from the two sides of the mirror. Metamirror is a single planar array of electrically small…