相关论文: Stability Analysis of the Laser System for the TTF…
We report the first experimental demonstration of efficient and high-power operation of a Ti:sapphire laser pumped by a simple, compact, continuous-wave (cw) fiber-laser-based green source. The pump radiation is obtained by direct…
An ideal plasma lens can provide the focusing power of a small f-number, solid-state focusing optic at a fraction of the diameter. An ideal plasma lens, however, relies on a steady-state, linear laser pulse-plasma interaction. Ultrashort…
We describe laser systems for photoionization, Doppler cooling and quantum state manipulation of beryllium ions. For photoionization of neutral beryllium, we have developed a continuous-wave 235 nm source obtained by two stages of frequency…
We report the results of observations of H- beam instabilities at the Fermilab Linac. By intentionally creating "high" background pressure with different gases in the 750 keV transport line we observed coherent transverse beam oscillations.…
The superb precision of an atomic clock is derived from its stability. Atomic clocks based on optical (rather than microwave) frequencies are attractive because of their potential for high stability, which scales with operational frequency.…
An overview is given of the methods and preliminary results from dedicated beam studies on three topics conducted over five days in July 2023. In the first study, the Fermilab Booster magnets were held constant at magnetic fields…
The Fermilab booster has an intensity upgrade plan called the Proton Improvement plan (PIP). The flux throughput goal is 2E17 protons/hour, which is almost double the current operation at 1.1E17 protons/hour. The beam loss in the machine is…
The driving engine of the Free Electron Laser in Hamburg (FLASH) is an L-band superconducting accelerator. It is designed to operate in burst mode with 800 microsecond pulse duration at a repetition rate of 10 Hz. The maximum accelerated…
The production of ions via laser ablation for the loading of radiofrequency (RF) ion traps is investigated using a nitrogen laser with a maximum pulse energy of 0.17 mJ and a peak intensity of about 250 MW/cm^2. A time-of-flight mass…
The production of broadband, terawatt terahertz (THz) pulses has been demonstrated by irradiating relativistic lasers on solid targets. However, the generation of extremely powerful, narrow-band, and frequency-tunable THz pulses remains a…
Free-electron lasers (FELs) generate the brightest coherent X-ray pulses available, enabling atomic-resolution and femtosecond-timescale studies across physics, chemistry, and biology. Realising their full potential at extreme peak powers…
Proposed fourth generation light sources using SASE FELs to generate short pulse, coherent, X-rays require demonstration of high brightness electron sources. The Gun Test Facility (GTF) at SLAC was built to test high brightness sources for…
The generation of collimated, high brilliance $\gamma$-ray beams from a structured plasma channel target is studied by means of 2D PIC simulations. Simulation results reveal an optimum laser pulse pulse duration of $20\,\text{fs}$, for…
We report on an experimental study on the interaction of a high-contrast 40 fs duration 2.5 TW laser pulse with an argon cluster target. A high-charge, homogeneous, large divergence electron beam with moderate kinetic energy (~2 MeV) is…
Laser-driven proton sources have long been developed with an eye on their potential for medical application to radiation therapy. These sources are compact, versatile, and show peculiar characteristics such as extreme instantaneous dose…
We present a 10 mJ-class laser system for seeding petawatt-class Ti:Sa lasers based on a hybrid, femtosecond optical parametric and negatively chirped Ti:Sa-based amplification architecture. Output pulses with 13 mJ energy, 14.4 fs…
High-energy terahertz pulses are challenging to produce due to the low conversion efficiency and limited optical damage threshold of nonlinear crystals. Here, we describe the high-efficiency generation of terahertz radiation pulses with…
The intensity of charged particle beams at Fermilab must be kept within pre-determined safety and operational envelopes in part by assuring all beam within a few percent has been transported from any source to destination. Beam intensity…
We describe a study of high-energy Compton beam polarimeters for the future e+e- linear collider machine TESLA. A segment of the beam delivery system has been identified, which is aligned with the e+e- collision axis and which has a…
Seeded free-electron lasers (FELs) capable of operating at repetition rates up to the MHz level are in high demand for advanced time-resolved spectroscopies, which require both full longitudinal coherence and high average photon flux in the…