相关论文: Insertion Device Controls at the Swiss Light Sourc…

The timing system of the Swiss Light Source is based on the event system concept of APS, Argonne [1]. However, for SLS the hardware was completely redesigned while preserving the software compatibility with the APS system. This gave us a…

The Swiss Light Source (SLS) has in the order of 500 magnet power supplies (PS) installed, ranging from from 3 A/20 V four-quadrant PS to a 950 A/1000 V two-quadrant 3 Hz PS. All magnet PS have a local digital controller for a digital…

The commissioning of the Swiss Light Source (SLS) started in Feb. 2000 with the Linac, continued in May 2000 with the booster synchrotron and by Dec. 2000 first light in the storage ring were produced. The first four beam lines had to be…

On December 15th the Swiss Light Source (SLS) produced a stored beam for the first time. This important milestone was achieved in a very tight time schedule. The fact that all major systems are controlled by Epics made this challenge…

The upgrade of the Swiss Light Source, called SLS 2.0, is scheduled for 2023-24. The current storage ring will be replaced by one based on multi-bend achromats, allowing for about 30 times higher brightness. Due to the stronger focusing and…

This paper presents a static generation expansion planning formulation in which operational and investment decisions for a wide range of technologies are co-optimized from a centralized perspective. The location, type and quantity of new…

The Source Development Lab (SDL) at BNL consists of a 230 MeV electron linac and a 10 m long wiggler for short wavelength Free Electronic Laser (FEL) development. The original control system [1] was based on the one in use at the National…

The National Ignition Facility (NIF) requires that pulses from each of the 192 laser beams be positioned on target with an accuracy of 50 um rms. Beam quality must be sufficient to focus a total of 1.8 MJ of 0.351-um light into a…

The original LIGO suspension control system [1] used analog circuitry to implement the closed loop damping required for local control of each the suspended optics. Recent developments in analog to digital converters (ADC), digital to analog…

Joint communication and sensing applications require devices that can analyze multiple electromagnetic waves and process them in real time directly in the analog domain. In optics, the growing maturity of photonic integrated platforms…

Closed-loop control systems employ continuous sensing and actuation to maintain controlled variables within preset bounds and achieve the desired system output. Intentional disturbances in the system, such as in the case of cyberattacks,…

The National Ignition Facility (NIF) will contain the world's most powerful laser. NIF requires more than 1500 precisely timed trigger pulses to control the timing of laser and diagnostic equipment. The Integrated Timing System applies new…

A fully analytical controller design is proposed to tackle a periodic control problem for stable linear systems with an input delay. Applying the internal model control scheme, the controller design reduces to designing a filter, which is…

The growing integration of distributed renewable generation and the electrification of heating and transportation are rapidly increasing the number of flexible devices within modern distribution grids. Leveraging the aggregated flexibility…

In the present work, an embedded PI controller is designed for speed regulation of DC servomotor over a wireless network. The embedded controller integrates PI controller with a proposed time-delay estimator and an adaptive digital Smith…

To establish a time reference frame between two users in quantum key distribution, a synchronization calibration process is usually applied for the case of using gated mode single-photon detectors (SPDs). Traditionally, the synchronization…

The optical injection of charge and spin currents are investigated in Ge$_{1-x}$Sn$_{x}$ semiconductors as a function of Sn content. These emerging silicon-compatible materials enable the modulation of these processes across the entire…

We present the design and implementation of a measurement system that enables parallel drive and detection of small currents and voltages at numerous electrical contacts to a multi-terminal electrical device. This system, which we term a…

The decarbonization goals worldwide drive the energy transition of power distribution grids, which operate under increasingly volatile conditions and closer to their technical limits. In this context, localized operational data with high…

The timing system of SPring-8 booster synchrotron generates various timing signals concerning beam injection, acceleration from 1 GeV to 8 GeV and ejection. We have improved the timing system of the synchrotron giving it better stability…