相关论文: Linux-Based Toolkit in the VEPP-4 Control System

We outline the design of beam experiments for the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility and for the Integrable Optics Test Accelerator (IOTA), based on synchrotron light emitted by the electrons…

Microelectromechanical systems (MEMS) have been applied to many measurement problems in physics, chemistry, biology and medicine. In parallel, cavity optomechanical systems have achieved quantum-limited displacement sensitivity and ground…

Visual Place Recognition (VPR) has been a subject of significant research over the last 15 to 20 years. VPR is a fundamental task for autonomous navigation as it enables self-localization within an environment. Although robots are often…

Visible light communication (VLC) backscatter has been proposed as a wireless access option for Internet of Things (IoT). However, the throughput of the state-of-the-art VLC backscatter is limited by simple single-carrier pulsed modulation…

Accurate flux measurement of low energy charged particles, trapped in the magnetosphere, is necessary for Space Weather characterization and to study the coupling between the lithosphere and magnetosphere, allowing the investigation of the…

An instrument has been developed for precision controlled exposures of electronic devices and material samples in particle beams. The instrument provides simultaneously a real time record of the profile of the beam and the fluence received.…

The Very Large Area Gamma-ray Space Telescope Pathfinder (VLAST-P), as the technology validation satellite for the VLAST mission, is designed to observe high-energy solar bursts on orbit. The CsI electromagnetic calorimeter (ECAL) is one of…

The silicon pixel sensor is the core component of the vertex detector for the Circular Electron Positron Collider~(CEPC). The JadePix3 is a full-function large-size CMOS chip designed for the CEPC vertex detector. To test all the functions…

The Phase-1 upgrade of the CMS pixel detector is built out of four barrel layers (BPix) and three forward disks in each endcap (FPix). It comprises a total of 124M pixel channels in 1,856 modules, and it is designed to withstand…

High-fidelity control of the thousands to millions of programmable qubits needed for utility-scale quantum computers presents a formidable challenge for control systems. In leading atomic systems, control is optical: UV-NIR beams must be…

This paper focuses on the simulation of multi-die System-on-Chip (SoC) architectures using VisualSim, emphasizing chiplet-based system modeling and performance analysis. Chiplet technology presents a promising alternative to traditional…

Scanning transmission electron microscopy (STEM) allows for imaging, diffraction, and spectroscopy of materials on length scales ranging from microns to atoms. By using a high-speed, direct electron detector, it is now possible to record a…

The Tile PreProcessor (TilePPr) is the core element of the Tile Calorimeter (TileCal) off-detector electronics for High-luminosity Large Hadron Collider (HL-LHC). The TilePPr comprises FPGA-based boards to operate and read out the TileCal…

The central institute of electronics (ZEA-2) in the Forschungszentrum Juelich (FZJ) has developed a system to scan the response of the photocathode of photomultiplier tubes (PMT). The PMT sits tight on a supporting structure, while a blue…

Optical beam steering is a key element in many industrial and scientific applications like in material processing, information technologies, medical imaging and laser display. Even though galvanometer-based scanners offer flexibility, speed…

The imaging performance of a high-resolution preclinical microPET system employing liquid xenon as the gamma ray detection medium was simulated. The arrangement comprises a ring of detectors consisting of trapezoidal LXe time projection…

DIFT (Dynamic Information Flow Tracking) has been a hot topic for more than a decade. Unfortunately, existing hardware DIFT approaches have not been widely used neither by research community nor by hardware vendors. It is due to two major…

Deep learning research has generated widespread interest leading to emergence of a large variety of technological innovations and applications. As significant proportion of deep learning research focuses on vision based applications, there…

The new beam profile measurement for the Antiproton Decelerator (AD) at CERN is based on a single Gas Electron Multiplier (GEM) with a 2D readout structure. This detector is very light, ~0.4% X0, as required by the low energy of the…

Detector control systems (DCS) include the read out, control and supervision of hardware devices as well as the monitoring of external systems like cooling system and the processing of control data. The implementation of such a system in…