相关论文: Generating EPICS IOC Databases from a Relational D…

The EPICS based control system of the ISAC radioactive beam facility supervises several sub-systems, which are controlled by PLCs. Most of the devices are protected by non-trivial interlocks, which are implemented with ladder-logic…

The Advanced Photon Source is now in its fifth year of routine beam production. The EPICS-based [1] control system has entered the phase in its life cycle where new control algorithms must be implemented under increasingly stringent…

Implementation and commissioning of the EPICS based control system for the ISAC radioactive beam facility was completed. The target ion source, mass separator, and low-energy beam-lines started beam production for experiments. In parallel,…

We will use EPICS toolkit [1] to build a prototype for upgrading BEPC control system. The purposes are for the following three aspects: (1) Setup a network based distributed control system with EPICS. (2) Study some front-end control…

Many large accelerator facilities have adopted the open-source EPICS software as the quasi-industry standard for control systems. They typically have access to their own electronics laboratory and dedicated personnel for control system…

An important component of EPICS (Experimental Physics and Industrial Control System) is iocCore, which is the core software in the IOC (input/output controller) front-end processors. At ICALEPCS 1999 a paper was presented describing plans…

This technical document describes the comparison of the EPICS PV gateway and a new solution based on relay of UDP packets using the UDP-HELPER switch feature, iptables and a C program. The solution can be applied on environments that…

While the Experimental Physics and Industrial Control System (EPICS) is widely used at large laboratories for slow controls and instrumentation, the deployment of a full EPICS installation can be difficult, with a steep learning curve to…

Visual DCT is an EPICS configuration tool completely written in Java and therefore supported in various systems. It was developed to provide features missing in existing configuration tools as Capfast and GDCT. Visually Visual DCT resembles…

Internal continuous discharge can rapidly damage high-current ion sources and their extraction systems composed of several electrodes at high voltage. To prevent this continuous discharge inside the extraction system, a rapid prototype…

Background and Purpose: Architectural deficiencies in EPICS lead to inefficiency in the development and application of EPICS IOCs. An unintrusive solution is replacing EPICS IOCs with more maintainable and flexible Python IOCs, only reusing…

The SNS Project intends to integrate Conventional Facility Controls with its EPICS-based Accelerator and Target Control Systems. EPICS will therefore be used to provide distributed high-level access to all subsystems of the SNS conventional…

Integrated sensing and communication (ISAC) has emerged as a key paradigm for next-generation wireless systems, which allows wireless resources to be used for data transmission and target sensing simultaneously. In this paper, multi-user…

Experimental Physics and Industrial Control System (EPICS) is a software tool that during last years has become relevant as a main framework to deploy distributed control systems in large scientific environments. At the moment, ESS Bilbao…

In order to fulfill the test requirement of KSTAR (Korea Superconducting Tokamak Advanced Research) superconducting magnet system, a large scale superconducting magnet and conductor test facility, SSTF (Samsung Superconductor Test…

Integrated sensing and communication (ISAC) has been defined as one goal for 6G mobile communication systems. In this context, this article introduces a bistatic ISAC system based on orthogonal frequency-division multiplexing (OFDM). While…

The Static Database Access library was first introduced in EPICS (Experimental Physics and Industrial Control System) Release 3.11 in 1994. It provides an application program interface (API) for database configuration tools written in C to…

Mobile edge computing (MEC) is powerful to alleviate the heavy computing tasks in integrated sensing and communication (ISAC) systems. In this paper, we investigate joint beamforming and offloading design in a three-tier integrated sensing,…

Fermilab has traditionally not been an EPICS house; as such expertise in EPICS is limited and scattered. PIP-II will be using EPICS for its control system. When in operation, it will need to interface with the existing, modernized (see…

The Relational Database Aspects of Argonnes ATLAS Control System Argonnes ATLAS (Argonne Tandem Linac Accelerator System) control system comprises two separate database concepts. The first is the distributed real-time database structure…