相关论文: Pulsed SC Proton Linac

A muon collider as well as a neutrino factory requires a large number of muons with a kinetic energy of 50GeV or more. Muon survival demands a high gradient linac. The large transverse and longitudinal emittance of the muon beam coming from…

Front end of a CW linac of the Project X contains an H source, an RFQ, a medium energy transport line with the beam chopper, and a SC low-beta linac that accelerates H- from 2.5 MeV to 160 MeV. SC Single Spoke Resonators (SSR) will be used…

SPPC (Super Proton-Proton Collider) is a discovery machine that is designed for energy frontier research in two decades from now, as the second stage of the CEPC-SPPC project. The main objective is to carry out experiments at 125 TeV in…

The proposed electron-proton/ion collider at CERN, the LHeC, can test fundamental and novel aspects of QCD and electroweak interactions as well as explore physics beyond the standard model over an exceptionally large kinematic range.

The article considers an opportunity of pulsed acceleration of the proton beam in a spiral wave guide. The radial focus of the proton beam in the accelerator is carried out by means of the magnetic field of ten Tesla, generated by a…

The advantage of the linac-ring type electron proton collider is that it allows for the straightforward construction of $\gamma$p collider. In a $\gamma$p collider high energy photons can be generated from Compton backscattering of laser…

This paper describes a design for the front end of a superconducting (SC) ion linac which can accept and simultaneously accelerate two charge states of uranium from an ECR ion source. This mode of operation increases the beam current…

The future of collider physics is under investigation. With the High Luminosity LHC program lasting until the late 2030s, the next machine in the energy frontier is envisioned to appear in 30--40 years, which may be too far into the future…

The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…

The Low Energy Relativistic Heavy Ion Collider (RHIC) electron Cooler (LEReC) is designed to deliver a 1.6 MeV to 2.6 MeV electron beam, with rms dp/p less than 5e-4. The superconducting radiofrequency (SRF) Booster Cavity is the major…

In order to study the dynamic response of the material and the physical mechanism of the fluid dynamics, an accelerator scenario which can be applied to hard X-ray free electron laser and high energy electron radiography was proposed. This…

Strong-field quantum electrodynamics (SF-QED) plays a crucial role in ultraintense laser matter interactions, and demands sophisticated techniques to understand the related physics with new degrees of freedom, including spin angular…

The superconducting electron accelerator S-DALINAC enables electron scattering experiments with low momentum transfer and high energy resolution. In order to perform experiments on helium with high precision and high luminosity, a…

Following the PIP-II 800 MeV Linac, Fermilab will need an accelerator that extends from that linac to the MI injection energy of ~8 GeV, completing the modernization of the Fermilab high-intensity accelerator complex. This will maximize the…

With the planned turn-on of the PIP-II 800 MeV superconducting proton linac, Fermilab will potentially become the world's best laboratory at which to carry out fundamental muon measurements, sensitive searches for symmetry violation, and…

The Proton Improvement Plan II (PIPII) is a superconducting linear accelerator being built at Fermilab that will provide 800 MeV proton beams for neutrino production. The Linac requires cooling at 80 K, 5 K, and 2 K temperatures, which will…

An Alvaretz-type DTL, to accelerate the H- ion beam from 3 to 50 MeV, is being constructed as the injector for the JAERI/KEK Joint Project. The following components of the DTL have been developed: (1) a cylindrical tank, made by copper…

The LHeC provides an intense, high energy electron beam to collide with the LHC. It represents the highest energy application of energy recovery linac (ERL) technology which is increasingly recognized as one of the major pilot technologies…

The full conceptual design report is presented for the 3 T superferric dipole for the proposed electron-ion collider JLEIC. It features a novel superconducting cable-in-conduit (CIC) winding that provides stress management, excellent field…

A beam dynamics design of 352.2 MHz Radio-Frequency Quadrupole (RFQ) of Turkish Accelerator Center (TAC) project which accelerates continuous wave (CW) proton beam with 30 mA current from 50 keV to 3 MeV kinetic energy has been performed in…