相关论文: Design of the SNS Normal Conducting Linac RF Contr…

The SNS linac accelerates an average beam current of 2 mA to an energy of 968 MeV. The linac is pulsed at 60 Hz with an H- beam pulse of 1 ms. The first 185 Mev of the linac uses normal conducting cavities, and the remaining length of the…

The Spallation Neutron Source (SNS) is being designed, constructed, installed and commissioned by the staff of six national laboratories, Argonne National Laboratory, Brookhaven National Laboratory, Jefferson National Accelerator…

The China spallation neutron source (CSNS) linac is designed with beam energy of 81MeV and a peak current of 15mA in the first phase. The RF power system for the 81 MeV Linac requires 8 units of RF power sources, each unit has one…

The SNS control system communication network will take advantage of new, commercially available network switch features to increase reliability and reduce cost. A standard structured cable system will be installed. The decreasing cost of…

The Front End of the Spallation Neutron Source (SNS) extends from the Ion Source (IS), through a 65 keV LEBT, a 402.5 MHz RFQ, a 2.5 MeV MEBT, ending at the entrance to the DTL. The diagnostics suite in this space includes stripline beam…

The Spallation Neutron Source (SNS) is a partnership between six laboratories. To ensure a truly integrated control system, many standards have been agreed upon, including the use of EPICS as the basic toolkit. However, unique within the…

China Spallation Neutron Source(CSNS) target power will upgrade to 500 kW(CSNS-II) from 300kW, energy gain of H-Linac will up to 300 MeV from 80 MeV using about 50 superconductor cavities. LLRF is an important device for controlling the…

Building an accelerator at six geographically dispersed sites is quite mad, but politically expedient. The Spallation Neutron Source (SNS), currently under construction in Oak Ridge, Tennessee, combines a pulsed 1 Gev H- superconducting…

The RF system for the SNS superconducting linac consists of a superconducting cavity, a klystron, and a low-level RF (LLRF) control system. For a proton linac like SNS, the field in each individual cavity needs to be controlled to meet the…

In the National Spallation Neutron Source (NSNS) design, a 180 meter long transport line connects the 1 GeV linac to an accumulator ring. The linac beam has a current of 28 mA, pulse length of 1 ms, and 60 Hz rep rate. The high energy…

The Spallation Neutron Source (SNS) vacuum instrumentation and control systems are being designed at Lawrence Berkeley National Laboratory (LBNL), Brookhaven National Laboratory (BNL), Thomas Jefferson National Accelerator facility (TJNAF)…

External contractors are developing the local cooling and vacuum control systems for the Spallation Neutron Source (SNS) linac. Soon these systems will be integrated into the facility-wide controls system. Allen-Bradley Logix5000 series…

The Source Development Lab (SDL) at BNL consists of a 230 MeV electron linac and a 10 m long wiggler for short wavelength Free Electronic Laser (FEL) development. The original control system [1] was based on the one in use at the National…

This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a new injector to the Alternating Gradient Synchrotron (AGS) of the Brookhaven National Laboratory (BNL). The Linac beam energy is in the range of 1.5…

LINAC 4 is a normal conducting H- linac proposed at CERN to provide a higher proton flux to the CERN accelerator chain. It should replace the existing LINAC 2 as injector to the Proton Synchrotron Booster and can also operate in the future…

Los Alamos National Laboratory (LANL) is designing a coupled cavity linac (CCL) for the Spallation Neutron Source (SNS) being built at Oak Ridge National Laboratory (ORNL). As part of the design process, a proto-type, Hot Model, consisting…

The cryogenic system for the Spallation Neutron Source (SNS) is designed by Jefferson Laboratory (JLab) personnel and is based on the existing JLab facility. Our task is to use the JLab control system design [2] as much as practical while…

The Spallation Neutron Source (SNS) timing and Real Time Data Link (RTDL) systems are being designed and developed at Brookhaven National Laboratory (BNL), Los Alamos National Laboratory (LANL) and other SNS collaborating labs [1]. The…

For many next-generation high intensity proton accelerator applications including the Spallation Neutron Source (SNS), superconducting (SC) RF provides the technology of choice for the linac. In designing the superconducting cavity, several…

In a long-term planning for neutrino experiments in China, a medium baseline neutrino beam is proposed which uses a CW superconducting linac of 15 MW in beam power as the proton driver. The linac will be based on the technologies which are…