相关论文: Dispersion in optical fibers and timing for partic…
A system based on commercially available items, such as a laser diode, emitting in the visible range $\sim 400$ nm,and multimode fiber patches, fused fiber splitters and optical switches may be assembled,for time calibration of…
Dispersion studies are conducted on 1m long multimode polymer spiral waveguides with different refractive index profiles. Bandwidth-length products >40GHzxm are obtained from such waveguides under a 50/125 um MMF, indicating the potential…
We demonstrate fast characterization (~1.4 microseconds) of both the dispersion and dispersion slope of long optical fiber links (~25 km) using dual quadrature spectral interferometry with an optical frequency comb. Compared to previous…
We demonstrate that porous fibers have low effective material loss over an extended frequency range, 4.5 times larger bandwidth than that can be achieved in sub-wavelength solid core fibers. We also show that these new fibers can be…
We report on a single-mode photonic crystal fiber with attenuation and effective area at 1550 nm of 0.48 dB/km and 130 square-micron, respectively. This is, to our knowledge, the lowest loss reported for a PCF not made from VAD prepared…
One of the fundamental limitations to high bit rate, long distance, telecommunication in optical fibers is Polarization Mode Dispersion (PMD). Here we introduce a conceptually new method to reduce PMD in optical fibers by carrying out…
Several multi-core fibers (MCF) were characterized using Correlation Optical Time Domain Reflectometry (C-OTDR) in terms of propagation delay and polarization mode dispersion (PMD). The results show that the propagation delay in the cores…
Exploiting two interfering fields which are initially in the same temporal mode but with the spectra altered by propagating through different fibers, we characterize how the spectra of temporal modes changes with the fiber induced…
Time-of-flight (ToF) 3D imaging has a wealth of applications, from industrial inspection to movement tracking and gesture recognition. Depth information is recovered by measuring the round-trip flight time of laser pulses, which usually…
We study the dispersion and leakage properties for the recently reported low-loss photonic band-gap fiber by Smith et al. [Nature 424, 657 (2003)]. We find that surface modes have a significant impact on both the dispersion and leakage…
The effect of Kerr-induced optical fiber nonlinearities in C-band (5 THz) EDFA and C+L-band (12.5 THz) Raman-amplified optical communication systems has been studied considering the impact of third-order fiber dispersion. The performance of…
We propose a very simple method for measuring the zero-dispersion wavelength of an optical fiber as well as the ratio between the third- and fourth-order dispersion terms. The method is based on the four wave mixing process when pumping the…
We report the characterisation of anti-resonant hollow core optical fibres guiding at least 50 spatial modes in the infrared. Their propagation losses were measured to be between 0.1 and 0.2 dB/m from 1000 to 1500 nm wavelength, with bend…
Tapered optical fibers (TOFs) with sub-wavelength-diameter waists, known as optical nanofibers, are powerful tools for interfacing quantum emitters and nanophotonics. These applications demand stable polarization of the fiber-guided light…
To address the fundamental limitations imposed by chromatic dispersion and environmental susceptibility in standard single-mode fiber (SMF) for long-haul high-precision time transfer, we systematically explore the application potential of…
Optical parametric oscillation (OPO) in Kerr microresonators can efficiently transfer near-infrared laser light into the visible spectrum. To date, however, chromatic dispersion has mostly limited output wavelengths to >560 nm, and robust…
We have developed a means for accurate time transfer using optical fibers and aim at the synchronization of clocks located at different places on an institute campus with an overall uncertainty of 100 ps or better. Such an installation…
We propose and study a method for measuring the chromatic dispersion parameter (D) of optical fibers and bulk optical elements through the use of a single-arm three-wave interferometer and a fiber femtosecond frequency comb (FFFC). The FFFC…
Multimode optical fibers represent the ideal platform for transferring multidimensional light states. However, dispersion degrades the correlations between the light's degrees of freedom, thus limiting the effective transport of ultrashort…
We propose an efficient method to determine the effective refractive index of step-index optical fibers from the visible to the mid-IR and thus allowing to infer their dispersive properties over a broad spectral range. The validity of the…