相关论文: SNS Standard Power Supply Interface

The Multiple Sensor Interface is a simple sensor interface that works with USB, RS485 and GPIO. It allows one to make measurements using a variety of sensors based on the change of inductance, resistance, capacitance, and frequency using…

Each accelerator control system has a variety of measurement devices. One of the most common types of instrument interfaces used for their control is a serial (RS-232) bus. It is inexpensive and adequate for relatively simple measurement…

The PEP-II storage rings at SLAC each have 3492 'buckets' into which electrons and positrons can be injected into the high- and low-energy rings. Equipment to measure the currents of all the individual buckets was originally provided by the…

In current Medium Voltage DC (MVDC) Shipboard Power Systems (SPSs), multiple sources exist to supply power to a common dc bus. Conventionally, the power management of such systems is performed by controlling Power Generation Modules (PGMs)…

This critical analysis offers a comprehensive overview of the efficiency and noise reduction methodologies applied in switch mode power supplies (SMPSs) and the emerging trends in the field. The study acknowledges that power supplies are an…

Efficient operation of a submillimeter interferometer requires remote (preferably automated) control of mechanically tuned local oscillators, phase-lock loops, mixers, optics, calibration vanes and cryostats. The present control system for…

For decades, power system stabilizers paired with high initial response automatic voltage regulators have served as an effective means of meeting sometimes conflicting system stability requirements. Driven primarily by increases in power…

The injection control system of Hefei Light Source (HLS) storage ring is a subsystem of the upgraded HLS control system, which is based upon EPICS. Three programmable logic controllers (PLCs) are used as device controllers, which control…

This paper presents an improved secondary voltage control (SVC) methodology incorporating compressive sensing (CS) for a multi-area power system. SVC minimizes the voltage deviation of the load buses while CS deals with the problem of the…

The Front End of the Spallation Neutron Source (SNS) extends from the Ion Source (IS), through a 65 keV LEBT, a 402.5 MHz RFQ, a 2.5 MeV MEBT, ending at the entrance to the DTL. The diagnostics suite in this space includes stripline beam…

We describe a modular multi-channel data acquisition system based on the 5-15 Gigasample-per-second waveform-recording PSEC4 chip. The system architecture incorporates two levels of hardware with FPGA-embedded system control and in-line…

A noise-tolerant data communications fabric has been developed to meet the real-time data acquisition and control requirements of fast feedback loops, machine protection systems, pulse-to-pulse sequencing, and machine-experiment…

The cryogenic system for the Spallation Neutron Source (SNS) is designed by Jefferson Laboratory (JLab) personnel and is based on the existing JLab facility. Our task is to use the JLab control system design [2] as much as practical while…

Artificial-intelligence (AI) workloads are driving rapid growth in data-center electricity use and rack power density, increasing demand for power-delivery systems that are efficient and robust to fast load transients. Conventional…

We will use EPICS toolkit [1] to build a prototype for upgrading BEPC control system. The purposes are for the following three aspects: (1) Setup a network based distributed control system with EPICS. (2) Study some front-end control…

Electromagnetic modeling with MAFIA of the combined beam position-phase monitors (BPPMs) for the Spallation Neutron Source (SNS) linac has been performed. Time-domain 3-D simulations are used to compute the signal amplitudes and phases on…

We present the outlines of a new microcontroller based data acquisition system which is aimed for reliable operation in a typical cosmic ray particle registration experiment. The system supports connection of up to 16 input signals and…

Always-on converter health monitoring demands sub-mW edge inference, a regime inaccessible to GPU-based physics-informed neural networks. This work separates spiking temporal processing from physics enforcement: a three-layer leaky…

Power side-channel (PSC) attacks are widely used in embedded microcontrollers, particularly in cryptographic applications, to extract sensitive information. However, expanding the applications of PSC attacks to broader security contexts in…

With the rapid development of power distribution systems (PDSs), the number of terminal devices and the types of delivered services involved are constantly growing. These trends make the operations of PDSs highly dependent on the support of…