相关论文: UWB On-Body Radio Channel Modelling Using Ray Theo…

With an increase in the application of ultra-wideband (UWB) electromagnetic pulses in the communications industry, radar, biotechnology and medicine, comes an interest in UWB exposure safety standards. Despite an increase of the scientific…

This paper presents an experimental study of the air-to-ground (AG) propagation channel through ultrawideband(UWB) measurements in an open area using unmanned-aerial-vehicles (UAVs). Measurements were performed using UWB radios operating at…

At millimeter-wave frequencies, diffuse scattering from rough surfaces is an important propagation mechanism. Including this mechanism in radio propagation modeling tools,such as ray-tracing, is a key step towards realizing accurate…

With the rapid deployments of 5G and 6G networks, accurate modeling of urban radio propagation has become critical for system design and network planning. However, conventional statistical or empirical models fail to fully capture the…

The upper midband, designated as Frequency Range 3 (FR3), is increasingly critical for the next-generation of wireless networks. Channel propagation measurements and their statistical analysis are essential first steps towards this…

Precise localization and tracking of moving non-collaborative persons and objects using a network of ultra-wideband (UWB) radar nodes has been shown to represent a practical and effective approach. In UWB radar sensor networks (RSNs),…

We present a novel algorithm that enhances the accuracy of electromagnetic field simulations in indoor environments by incorporating the Uniform Geometrical Theory of Diffraction (UTD) for surface diffraction. This additional diffraction…

Differential system for ultra wide band (UWB) transmission is a very attractive solution from a practical point of view. In this paper, we present a new direct sequence (DS) UWB system based on the conversion of the received signal from…

This paper studies the use of directional antennas for received signal strength difference (RSSD) based localization using ultra-wideband and demonstrates the achievable accuracy with this localization method applied to UWB. As introduced…

A parallel dispersive finite-difference time-domain (FDTD) method for the modeling of three-dimensional (3-D) electromagnetic cloaking structures is presented in this paper. The permittivity and permeability of the cloak are mapped to the…

In this paper, a spatially dispersive finite-difference time-domain (FDTD) method to model wire media is developed and validated. Sub-wavelength imaging properties of the finite wire medium slabs are examined. It is demonstrated that the…

Ultra-wideband (UWB) is a state-of-the-art technology designed for applications requiring centimeter-level localization. Its widespread adoption by smartphone manufacturer naturally raises security and privacy concerns. Successfully…

The finite-difference time-domain (FDTD) method is applied for modelling of wire media as artificial dielectrics. Both frequency dispersion and spatial dispersion effects in wire media are taken into account using the auxiliary differential…

This paper studies the air-to-ground (AG) ultra-wideband (UWB) propagation channel through measurements between 3.1 GHz to 4.8 GHz using unmanned-aerial-vehicles (UAVs). Different line-of-sight (LOS) and obstructed- LOS scenarios and two…

We propose a novel concurrent ranging technique for distance estimation with ultra-wideband (UWB) radios. Conventional schemes assume that the necessary packet exchanges occur in isolation, to avoid collisions. Concurrent ranging relies on…

Three dimensional (3D) radiation pattern of an antenna mounted at a drone can significantly influence the air-to-ground (A2G) link quality. Even when a drone transmitter is very close to a ground receiver, if the antenna orientations are…

This paper presents a global framework analysis of a microstrip antenna design circularly polarized with an operating frequency of 5.80 GHz and a bandwidth of at least 500 MHz. We evaluate the optimal antenna parameters to design…

The proposed UWB antenna covers mobile communications (GSM, EDG, UMTS(3G), LTE(4G)) and wireless networks (WIFI, WiMAX), within a theoretical bandwidth defined from 780MHz to 4.22GHz. The UWB antenna is designed and realized on a FR-4…

We present a corrective subcell averaging technique that improves on the accuracy of the volume-averaged finite-difference time-domain (FDTD) method in the presence of dispersive material interfaces. The method is based on an alternative…

Cognitive radio is rapidly shaping the future of wireless communications. Research on antenna design is very critical for the implementation of cognitive radio. A special antenna is required in cognitive radio for sensing and communicating.…